Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Darkness Delta


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 17
Like Tree9Likes

Thread: Marlin 795

  1. #1
    Member
    Join Date
    Aug 2012
    Location
    Otago
    Posts
    1,410

    Marlin 795

    I asked a question about this in a thread in the small game section, but probably better here...

    The price on these wee guns looks great. Right on my current budget. I hear good things about accuracy.

    Do they cycle subs?
    Can the barrel be shortened with out affecting reliability?
    Anyone done some DIY trigger mods?
    "The generalist hunter and angler is a well-fed mofo" - Steven Rinella

  2. #2
    Member
    Join Date
    Aug 2012
    Location
    Otago
    Posts
    1,410
    FFS - I still managed to get it into the wrong sub-forum
    viper likes this.
    "The generalist hunter and angler is a well-fed mofo" - Steven Rinella

  3. #3
    Member Max Headroom's Avatar
    Join Date
    Jul 2018
    Location
    Southland
    Posts
    4,124
    Mine cycles Remington subs just fine.

    Also interested to hear about triggers, mine has lightened up with use, but could be better.

    Anybody found an aftermarket stock with a pistol grip/ thumbhole?
    RIP Harry F. 29/04/20

  4. #4
    Member
    Join Date
    Aug 2012
    Location
    Otago
    Posts
    1,410
    Max Headroom likes this.
    "The generalist hunter and angler is a well-fed mofo" - Steven Rinella

  5. #5
    Member gadgetman's Avatar
    Join Date
    Jan 2012
    Location
    Christchurch
    Posts
    17,850
    I did a DIY trigger job with a 3.5" floppy drive shutter spring. Really easy and much better. Mine cycles subs well.
    Dama dama likes this.
    There are only three types of people in this world. Those that can count, and those that can't!

  6. #6
    Member
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    1,818
    Marlin 795 a basic little semiauto with an excellent micro-groove barrel. They shoot very well - most ducking just under 0.5" for 5 shot groups at 50m at best, and averaging not much above that.

    If you run action clean and fairly dry - just one drop of oil on bolt for lube, they will cycle very well. Use CCI ammos for best accuracy and cycling, though individual rifles can shoot well with other ammos.

    Trigger improved considerably by Mcarbo kit from US as above. Barrel chop not a problem.

    Good wee rifle - very accurate with right ammos and right shooter.
    Dama dama likes this.

  7. #7
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,444
    Gundoc did my trigger, it’s just fine now
    Identify your target beyond all doubt

  8. #8
    Member
    Join Date
    Sep 2019
    Location
    Rural TeAwamutu
    Posts
    1,829
    As @mudgripz said..... a fine wee shooter. Had mine chopped, suppressor on with a trigger job done.


    Sent from my iPhone using Tapatalk

  9. #9
    Member Kiwi-Hunter's Avatar
    Join Date
    Mar 2013
    Location
    Southland
    Posts
    837

    Marlin 795

    I'll bite.
    I have done the trigger springs with a mcarbo spring kit, !cons the kits expensive I included a new detent and spring as well, while it lightens the trigger pull! it leaves slack in the take up, to get round that MCARBO sell a trigger with a adjustment screw added to it. I got around this by having the trigger drilled and a adjustment screw added! this takes up the slack, great improvement. I would like an after market trigger kit which is all alloy and gets rid of the weak plastic setup.
    My barrel is cut to 12'' and still shoots and subs are all I shoot and they work at 100+, but prefer 50-60yards not as steady as I once was. This one shoots better than the Brno auto I had.
    They can be temperamental at times!! but have only experienced a few jam ups in the last 1500 rounds and that could have been ammo and on another occasion just ready for a clean.
    Here it is! rigged for night shift.
    KH
    Attached Images Attached Images  
    Last edited by Kiwi-Hunter; 11-12-2019 at 12:22 AM.
    gadgetman, Tentman and Dama dama like this.
    The Voice of Reason, Come let us Reason together...

  10. #10
    Member
    Join Date
    Aug 2012
    Location
    Otago
    Posts
    1,410
    Thanks @Kiwi-Hunter and others. 12" is a nice short barrel. I was thinking 14", but if it cycles and only using subs then 12" a very handy length. Trigger sounds "interesting".
    "The generalist hunter and angler is a well-fed mofo" - Steven Rinella

  11. #11
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,444
    They like being clean with only a little bit of light oil. Next time I clean it, I’m going to try some of the low stick fancy mountain bike chain oil instead
    Identify your target beyond all doubt

  12. #12
    Member Savage1's Avatar
    Join Date
    Dec 2011
    Location
    Whangarei
    Posts
    3,453
    Highly rate the 795, I’ve got myself a stainless steel one and will never sell it. They just do everything you need them to do, well.

  13. #13
    Member Max Headroom's Avatar
    Join Date
    Jul 2018
    Location
    Southland
    Posts
    4,124
    Mine has never hiccuped as far as I remember.

    A welcome change from my old Stirling 20P shell bender.
    Dama dama likes this.
    RIP Harry F. 29/04/20

  14. #14
    Member Kiwi-Hunter's Avatar
    Join Date
    Mar 2013
    Location
    Southland
    Posts
    837
    Quote Originally Posted by Dama dama View Post
    Thanks @Kiwi-Hunter and others. 12" is a nice short barrel. I was thinking 14", but if it cycles and only using subs then 12" a very handy length. Trigger sounds "interesting".
    MCARBO do a spring for subsonic! But I didn't need it, 14" is also a good length.
    12" is good for getting in and out of the truck, but mainly it's weight for me and the handling is great.
    I run mine dry and when the chamber is looking like a clean, I'll run it to it does, then give it a flush and dry and away again.
    Works for me tried running wet didn't get through the night.
    Tentman had said they like dry, well ive never run any dry and had to play with it to find out the hard way !now the Marlin runs dry.
    KH
    The Voice of Reason, Come let us Reason together...

  15. #15
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,444
    Next time it comes apart, it's getting this stuff on the bolt and inside the receiver. Sewing machine oil on the hammer assembly/trigger assembly as usual.

    https://www.evolutioncycles.co.nz/Pr...hoCRuQQAvD_BwE
    Identify your target beyond all doubt

 

 

Similar Threads

  1. Marlin 336 ss
    By Rock river arms hunter in forum Firearms, Optics and Accessories
    Replies: 5
    Last Post: 28-08-2016, 04:13 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!