Does anyone know of a neck sizing die that will work on the grendel my hornady one is to long
Printable View
Does anyone know of a neck sizing die that will work on the grendel my hornady one is to long
I found with my Grendel that it preferred full length sizing. I ran into trouble necking only with tight brass, especially if running at near it's max pressure.
I second that.. its a hot little case and doesnt respond well to neck sizing only. Its the only cartridge I full body size every load
Ok I'll stick to that then cheers for the info
Don’t bother mate just bump your sholder 2 thou or do a proper full length resize
Went down the ns route a few times but never much luck in several caliber’s includeing Grendel
They get tight after a couple of fireings then you have to fls
That’s not consistent if you bump the sholder every fireing you’re brass will be exactly the same every loading
Not the same for 2 then smaller on the 3rd etc
Hows the Grendel going anyway happy with it
Only used it a couple of times like it way more than the 223 it replaced boringly accurate