Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine DPT


User Tag List

+ Reply to Thread
Results 1 to 11 of 11
Like Tree9Likes
  • 3 Post By TeRei
  • 1 Post By ebf
  • 1 Post By zimmer
  • 1 Post By TeRei
  • 1 Post By outdoorlad
  • 2 Post By Bos

Thread: Neck turning

  1. #1
    Member
    Join Date
    Feb 2016
    Location
    Bombay
    Posts
    966

    Neck turning

    Who neck turns? What’s your set up?

  2. #2
    Member
    Join Date
    Mar 2012
    Location
    Hastings
    Posts
    2,316
    Nick Harvey mentioned in his book years ago about the pros and cons of it. Me I ignored it and went down the route for perfection. Did thousands of rounds for various calibres. Now the K&M kit sits unused in the reloading box.. The Holy Grail was in annealing. Never looked back and groups shrunk with unturned necks. Go figure.
    zimmer, chainsaw and caberslash like this.

  3. #3
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    2,939
    I have a K&M one.
    Shut up, get out & start pushing!

  4. #4
    ebf
    ebf is offline
    Mushroom juice ! Hic ! ebf's Avatar
    Join Date
    Jun 2012
    Location
    Above the Hutt
    Posts
    6,872
    K&M is where it's at.

    Honestly, unless you are doing hyper accuracy string shooting stuff like F-class, I would not bother with neck turning.

    Get an AMP annealer, buy good brass, and practice more (preferably using a 22LR that matches your competition setup)...
    dirkvanvuuren likes this.
    Viva la Howa ! R.I.P. Toby | Black rifles matter... | #illegitimate_ute

  5. #5
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Quote Originally Posted by TeRei View Post
    Nick Harvey mentioned in his book years ago about the pros and cons of it. Me I ignored it and went down the route for perfection. Did thousands of rounds for various calibres. Now the K&M kit sits unused in the reloading box.. The Holy Grail was in annealing. Never looked back and groups shrunk with unturned necks. Go figure.
    Same experience. Have a fortune tied up in a K&M. Only have one chambering that I will neck turn again for and that's when I next replace the brass for it. It's a super tight neck, another situation I don't do anymore in chambering.

    Also, I no longer have to chase donuts anymore since I parted company with my 284.

    About a year back I did spend more money on my K&M kit and bought 4 angled cutters to cover all the neck angles of my cartridges. Have still to use them...... Highly recommend that whatever is purchased it has the ability to correctly cut in to the shoulder at the right angle.

    The K&M is good but there are others out there with possibly better features eg the Pumpkin.
    Last edited by zimmer; 20-07-2021 at 09:46 AM.
    Puffin likes this.

  6. #6
    Member
    Join Date
    Mar 2012
    Location
    Hastings
    Posts
    2,316
    The quote from Harvey is his 1st edition pg 30 and he notes hunters should spend their time ensuring cases are trimmed to correct length. Harvey never did or ever commented on annealing.Your gains will be achieved there. There is a comment currently in this Forum that correct annealing can only be accomplished by a machine.Suggest this is nonsense. Annealing is achieved by the correct amount of heat at the right distance. How it is applied is irrelevant. Brass does not think hence it reacts by altering its structure by the proper amount of heat. Sorta like suggesting a deer can only be killed by a 65gr Sierra if it shot from an expensive carbon Sako. The projectile kills not the gun. One of the most successful hunters I ever met spotlighted Kaingaroa from 1980 to 1987. Caught once and gave it up. His weapon ?...the venerable 303. Why? ...because the deer never gotta way.He should know because it paid for his house which in Taupo is no mean feat because it is an expensive place to live.
    Phil_H likes this.

  7. #7
    Member
    Join Date
    May 2020
    Location
    Wellington
    Posts
    105
    I neck turn, to achieve consistent nick tension, accuracy increased moderately. I use the Hornady tool, with the Lee case holder in a 18v Drill. I can neck turn 60 cases an hour with high accuracy.

    Neck turning is well worth doing. You'd be surprised the numbers of necks that are not consistently thick around the 360 degree rotation. Only Lapua are consistently in the expected range.

    Winchester 243WSSM cases, both empty cases and factory loaded, are beyond credibility for uneven neck thickness, and not cut square. Necks are visibly faulty even in factory ammunition Neck turning and trimming are an absolute necessity for that calibre.

    And I have seen (admittedly less than the extreme of 243WSSM) variance in neck thickness in .223/5.56, 17Rem, .243, and .270. It is a good process to undertake to ensure your reloading group have consistent neck tension.

    I follow what benchresters do to achieve ultimate accuracy - and one of those tasks is to neck turn my brass. The Lee device for spinning the case for neck turning is so easy and quick to complete the task. And you only have to neck turn a case once.

  8. #8
    Member
    Join Date
    Feb 2016
    Location
    Bombay
    Posts
    966
    Cheers for the reply’s guys. I have an AMP annealer so I’ve got that part covered. I was more curious about neck turning due to wildcat case forming and necking down. Thinking 6-6.5x47 lapua and 7-300WSM

  9. #9
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    2,939
    Quote Originally Posted by Tuckerbox View Post
    Cheers for the reply’s guys. I have an AMP annealer so I’ve got that part covered. I was more curious about neck turning due to wildcat case forming and necking down. Thinking 6-6.5x47 lapua and 7-300WSM
    Yes it’s handy for that, when I first got my 260 I didn’t have any brass for it so I resized some 308 brass down, then gave it a light neck turn and more importantly gave it a small cut into the shoulder to stop donuts forming later on.

    Recently I neck turned some federal 270 brass I was given as it was quite a bit thicker than the Nosler I’m using and as I use a bushing die I wanted it the same thickness.
    Tuckerbox likes this.
    Shut up, get out & start pushing!

  10. #10
    Bos
    Bos is offline
    Member
    Join Date
    May 2017
    Location
    Blenheim
    Posts
    923
    My suggestion is to buy cheap brass and neck turn, or buy quality brass (Norma, Lapua, etc) and you wont have to. My experience is that Norma and Lapua are very consistent in neck thickness and concentricity. A lot of other brass isnt
    Tikka7mm08 and zimmer like this.

  11. #11
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    +1

 

 

Similar Threads

  1. Replies: 37
    Last Post: 28-09-2019, 08:05 AM
  2. Neck turning
    By Gibo in forum Reloading and Ballistics
    Replies: 46
    Last Post: 25-05-2016, 11:57 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!