Printable View
Bloody hell!
Just going to resize a bit of brass and it rips the ram apart!
It has lasted along time to be fair.
Might see if reloaders have a spare part as simple but works!https://uploads.tapatalk-cdn.com/202...a817894b15.jpg
Sent from my SM-A556E using Tapatalk
And you were just gently gently on the lever yeah?
I thought I had a spare.
Hiding on the top shelf in the shed!
https://uploads.tapatalk-cdn.com/202...50f8e21710.jpg
Sent from my SM-A556E using Tapatalk
It was the first round of the night to!Quote:
Originally Posted by inglishill
Sent from my SM-A556E using Tapatalk
And a bloody stuck case to boot.
No good deed goes unpunished as was going to make some hand loads up for the neighbour's 300 win mag.
I blame the rimmed casehttps://uploads.tapatalk-cdn.com/202...1a1fdf6fb5.jpg
Sent from my SM-A556E using Tapatalk
Use Redding sizing wax for the least effort required.
And that’s your second fail, you should have been in the kitchen tidying up after dinner :)
Done the tidy up bit.that is the first fail with one shot.Quote:
Originally Posted by 7mmsaum
Brand new dies tohttps://uploads.tapatalk-cdn.com/202...eb360ee50e.jpg
Sent from my SM-A556E using Tapatalk
Mow can't find my stuck case remover!Quote:
Originally Posted by andyanimal31
Fark......
Sent from my SM-A556E using Tapatalk
Yano, when I have days like that at work......I just pack up and go home, like the man says, some days are f#cked and can not be unf#cked
Put the die in the press upside down ( from underneath) and remove the expander
Then push the brass out (up) with the right drift punch with the ram
I can't get the expander ball out.Quote:
Originally Posted by 7mmsaum
Would work fine with bushing dies.
Got one problem solved but no bloody primer catcherhttps://uploads.tapatalk-cdn.com/202...9286e6b173.jpg
Sent from my SM-A556E using Tapatalk
Things are looking uphttps://uploads.tapatalk-cdn.com/202...ea8aad25d6.jpg
Sent from my SM-A556E using Tapatalk
been loading for 35 yrs only 1 stuck case tried one shot 10yrs ago f k me 10 stuck cases out of a couple hundred one shot is shit use imperial wax now or prefer dillon spray lube if you can get it .
I suggest you double check all the wiring in your immediate vicinity :)
Sorted!https://uploads.tapatalk-cdn.com/202...b2c9d69068.jpgQuote:
Originally Posted by andyanimal31
Sent from my SM-A556E using Tapatalk