Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Delta


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 18
Like Tree13Likes

Thread: Powder question

  1. #1
    Member
    Join Date
    Jun 2016
    Location
    Gloucester NSW Australia
    Posts
    55

    Powder question

    Hi all, I was sorting through some old tins of powder and discovered a near full tin of ar2207 that the tin lid was cross threaded on, so probably not sealed properly. The powder smells ok,might be a bit discoloured,a brown tinge on the top layer but under is normal grey. Do you think it is ok to load or stuffed? Could the burning rate be changed? Was going to load it for .222 my old load was 21 grains and 50 grain projectile from memory. Thanks Steve

  2. #2
    Member
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,375
    If it has been stored in a cool dry area then there is a good chance it will be just fine.

  3. #3
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,724
    Greetings Steverusty,
    The brown discolouration is usually a sign that the powder has degraded. As this is on the surface it is, as you suspected, likely due to exposure to the air. The powder may be OK, or may not be. I would not take the chance. Powder is cheap when compared to rifles and faces for that matter.
    Regards Grandpamac.

  4. #4
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,478
    Put it into a hole and light it, you will see it's very powerful stuff. Something has changed in it and likely altered the burn rate in an unknown way.

    The fire will be quite impressive. Here is a cinema storeroom of spare nitrocellulose film being burnt off, I hope it was not developed and we are watching priceless footage of the battle of the bulge going up. But go up it does. Now who really wants to be a fireman??? (-:

    An itch ... is ... a desire to scratch

  5. #5
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Agreed GPM.
    Use it to fertilise your lawn.
    Also, if it's in an old style tin have a look inside for any signs of rust on the walls.

    Years ago I had a can of milsurp 4895 pop it's screwed lid off. It was fumin away like mad. That had been sealed and stored in good conditions.
    Recently tossed some very old 3031 that, I felt, had a minor colour change and was on the verge of smelling "sharp".
    It's just no worth messing around if there is doubt.
    Cyclops and Moa Hunter like this.

  6. #6
    Bos
    Bos is offline
    Member
    Join Date
    May 2017
    Location
    Blenheim
    Posts
    930
    Yea Id get rid of it. Start afresh and then you know what youre dealing with

  7. #7
    Member Max Headroom's Avatar
    Join Date
    Jul 2018
    Location
    Southland
    Posts
    4,124
    Quote Originally Posted by Cordite View Post
    Put it into a hole and light it, you will see it's very powerful stuff. Something has changed in it and likely altered the burn rate in an unknown way.

    The fire will be quite impressive. Here is a cinema storeroom of spare nitrocellulose film being burnt off, I hope it was not developed and we are watching priceless footage of the battle of the bulge going up. But go up it does. Now who really wants to be a fireman??? (-:

    Be careful with it. I burned some in a 44 gallon drum once, having placed it in other rubbish and lit the rubbish.

    I stood well back, and when it did go up it was really fast and hot, and impressive.

    If I'd been looking in the drum at the time, I'dve had me face scorched pretty bad.
    RIP Harry F. 29/04/20

  8. #8
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,478
    Quote Originally Posted by Max Headroom View Post
    Be careful with it. I burned some in a 44 gallon drum once, having placed it in other rubbish and lit the rubbish.

    I stood well back, and when it did go up it was really fast and hot, and impressive.

    If I'd been looking in the drum at the time, I'dve had me face scorched pretty bad.
    Yes definitely in a dug HOLE, in case something unpredictable happens involving a very fast burn rate.

    That IS one scary fire though, is it not? Can a fire give you the shivers???
    An itch ... is ... a desire to scratch

  9. #9
    Member Max Headroom's Avatar
    Join Date
    Jul 2018
    Location
    Southland
    Posts
    4,124
    Quote Originally Posted by Cordite View Post
    Yes definitely in a dug HOLE, in case something unpredictable happens involving a very fast burn rate.

    That IS one scary fire though, is it not? Can a fire give you the shivers???
    At the end, yeah. Being a projectionist in a cinema with a smoking habit must've been fun in the old days......
    Cordite likes this.
    RIP Harry F. 29/04/20

  10. #10
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    6,680
    In the 1880s and 98s collars from formal shirts were made from "colliodion" a plastic made from nitrocellulose plasticized with camphor evidently a number of gentlemen smokers suffered unpleasant deaths before cause and effect were linked.
    Cordite likes this.

  11. #11
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,724
    Greetings All,
    No need to burn it. Rifle powder is high in nitrogen so it is excellent fertilizer. Just spread it thin and water it in. I believe that the Aussie powder is made out of gum trees so spread it under some of them and close the loop. Grew some rifle powder assisted broccoli at one time.
    Grandpamac.
    Steverusty and Cordite like this.

  12. #12
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,478
    Quote Originally Posted by grandpamac View Post
    Greetings All,
    No need to burn it. Rifle powder is high in nitrogen so it is excellent fertilizer. Just spread it thin and water it in. I believe that the Aussie powder is made out of gum trees so spread it under some of them and close the loop. Grew some rifle powder assisted broccoli at one time.
    Grandpamac.
    Ah, yes, but it's more FUN to burn it.... (<:
    chainsaw and Steverusty like this.
    An itch ... is ... a desire to scratch

  13. #13
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,724
    Quote Originally Posted by Cordite View Post
    Ah, yes, but it's more FUN to burn it.... (<:
    I'd gathered that. Not actually required though.

  14. #14
    Member
    Join Date
    Jun 2016
    Location
    Gloucester NSW Australia
    Posts
    55
    Yeah thanks guys I was thinking I should get rid of it ,it’s not worth the risk. I’ll chuck it on some rye that I am going to spread some urea on next week. Thanks again,cheers Steve

  15. #15
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,724
    Quote Originally Posted by Mauser308 View Post
    What was the burn rate of the broccoli haha? Bet that made some interesting smelling farts. Not my favourite vegetable...
    Congratulations Mauser 308,
    I was hoping that someone would pick up on the broccoli. I did not test the burning rate. With all that water it would have been too slow for any my rifles although it might have been useful in some of today's behemoths. Farts were normal for brassica's as was pressure. As for taste, my late father was a dedicated vegetable gardener right up to his death. Growing up we ate vegetables I had not seen before nor since so broccoli is small potatoes compared to salsify, kohl rabbi and Russian comphrey.
    Regards Grandpamac.

 

 

Similar Threads

  1. Un burned powder a question for all you pistol cartridge Reloaders
    By rambo-6mmrem in forum Reloading and Ballistics
    Replies: 11
    Last Post: 08-08-2017, 01:41 PM
  2. Black powder question
    By Kiwi-Hunter in forum Reloading and Ballistics
    Replies: 3
    Last Post: 17-11-2016, 08:00 PM
  3. Gun Powder Shipping Gun City Question
    By The Jackel in forum Reloading and Ballistics
    Replies: 18
    Last Post: 29-06-2013, 11:41 AM
  4. Powder Question
    By Toby in forum Reloading and Ballistics
    Replies: 73
    Last Post: 30-12-2012, 03:33 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!