pics needed..
Printable View
pics needed..
Here ya go
Dillon at standing height bench
Attachment 225691
Attachment 225692
Two station setup at sitting height bench
Attachment 225693
Attachment 225694
Attachment 225695
Presses not in use on storage shelf. The plate slides under a 100mm rail at the back to hold it
Attachment 225696
Ive got a redding big boss 2 and its an awesome press. makes very consistant ammo. no mess with primers. The press is at an angle so you have good visibility and access. Very tight and well made.
Dillon RL550C with Quick change kits all set up for each caliber. Initial set up cost more than say Lock N Load, but over time.......say no more.
ive seen press set up on board with T underneath....the tee section board...is placed in vice and taken out and vice n all go in bin when not in use.
Meet the twins,one each for the only 2 calibres that I load for.
And never change a die again.Attachment 225756
Here's the Lyman. It's a big beast of thing. Bloody solid and still tight as can be. Even came with the original instruction book. It was in a big box of all-sorts of random reloading gear. They guy I bought if off thought it was a shotgun reloading press.https://uploads.tapatalk-cdn.com/202...a2cf0e5fe4.jpghttps://uploads.tapatalk-cdn.com/202...357d7c5c21.jpghttps://uploads.tapatalk-cdn.com/202...611221bc88.jpg
Sent from my CPH2145 using Tapatalk