Thread: RCBS Chargemaster 1500 problem??

Originally Posted by crnkin

Mine does exactly the same thing. Got it from natchezz a few months ago. It does it after about 7 dispenses. I just thought they were junk and live with it. I turn it off at the wall then back on and it does another 7 or so.

In saying that I did 50 odd rounds the other night and it only did it twice.

Fuct if im sending it back. Will cost another $150 in freight both ways. Interesting that they dont all do it?

Chris

Mine wont even do 1 full dispense, Should only be freight one way there and if its broke, replaced and sent back free...??? worth the freight for what is supposed to be a top quality product IMO

Originally Posted by Spanners

Fluros are 'said' to cause an issue - mine was couple meters away and no probs

Now IIRC the power supply for them is a weird one - neg centre or something? - different to normal anyway - check the polarity on the unit and the supply.
I use a Old Uniden Cordless Ph power pack and is sweet.

The spot where the pan sits comes out - pull it out and make sure its fitted correctly

The final part of the trickle is tick... tick.... tick... a couple seconds apart, and the tube makes only a very small movement

Power fitting has same polarity as original power supply pug, shows center pin as positive, would doubt it would even run reversed? let alone not blow up... No final tick....tick....tick a couple of seconds apart and with no movement.

Originally Posted by muzr257

A mate of mine has the exact same problem.
Throughs the majority of the charge but wont turn the tube for the last few grains - but you can hear the motor turning but its like the clutch wont engage.
He might have to send it back as well.

Exactly what mine does. Does the TRICKLE button work at all on its own? A bunch of defective ones around?

Where was yours from?