Printable View
I brought a computer desk of trade me a while back. I’ve cleared my bench in the workshop finally and set up the desk
Dedicated to reloading. Also had the opportunity to stocktake while I was at it. Pleasantly surprised at the inventory on hand.
Attachment 174070
Attachment 174071
Attachment 174072
With spring around the corner it’s time to get loading
Looks good [emoji106]
You seem to be over stocked in 2225 and 7mm projectiles
Better send those my way![emoji1787]
Sent from my iPhone using Tapatalk
Looking good.
Are there any other calibres ? :DQuote:
Originally Posted by Reloader75
Yes but 7 is king!Quote:
Originally Posted by Nathan F
Sent from my iPhone using Tapatalk
My manQuote:
Originally Posted by Reloader75
I reckon a socialist re distribution of the reloading wealth! Comrades, who is with me!?Quote:
Originally Posted by Phil_H
if I was you I'd screw it to the wall.
Nice looking auto thrower there :pacman:
Just got my bench set up again so good to be back :D
Unfortunately I've loaded up enough rounds to last me a while so probably won't need to load anymore for at least a year......will keep stock piling powder, pills and primers though....nothing worse than being caught short
Nice one. Yep better to have too much than not enough. I’ve got a heap of loaded anmo in 708 and 7mmmag. Realistically I prob have enough to see me out lolQuote:
Originally Posted by dannyb
One would want to be able to wheel it into the house when the Mrs is out...Quote:
Originally Posted by bully
possibly might be good idea to put heftier piece of timber between press and bench top...maybe decent thickness of plywood?? when you get a sticky case there is fair bit of force applied, breaking front off desk could be very messy...components all over the show.
Thought about it. It’s pretty bloody sturdy for a $20 trade me desk. Will take the punt then reassess if there is stress fractures :yaeh am not durnk:Quote:
Originally Posted by Micky Duck
Nice setup, I found when using my chargemaster if I was seating projectiles while next one was measuring ou the bump from operating the press would give me overcharge. I mounted it to wall independent of bench to avoid that, alternative is be really fast and get projectile seated before it gets to trickle stage then sit still :thumbsup:
Nice set up and good stock of components.
Having a stock of powder in the current situation gives me the guilts a bit.
p.s. Not so guilty that I will give in to requests though :)
Attachment 174138
Greetings Nathan F,
Nice set up. Looks much nicer than mine. One thing I would suggest is to move it away from the garage doors. This would be a damp spot, especially in the deep south. This is really bad for electronics. My set up is also in our garage but at the opposite end to the door and walls are lined and insulated. I would like to have a small room in the garage dedicated for handloading plus a nicer bench like yours. Perhaps in our next house.
Regards Grandpamac.
