I've just got a hold of a really sturdy bench that i'm going to drill to fit press and powder measure but am undecided on where to put everything?
Anybody keen to post a photo of your reloading set up? I'll get a photo of my current one up shortly.
Printable View
I've just got a hold of a really sturdy bench that i'm going to drill to fit press and powder measure but am undecided on where to put everything?
Anybody keen to post a photo of your reloading set up? I'll get a photo of my current one up shortly.
being left or right handed will be the deciding feature.
I'm right handed and have my press set on the left hand side of the bench leaving the righthand side for everything else.
cheers
Pete
i have powder measure on left space in middle for scales/cases/prep area then press on right
also handy if you get a helper, one to measure one to load :thumbsup:
What p38 said with measure in front
Im the same as P38 but I have my powder thrower on the shelf in front of were I sit it is used for my Handgun loads only
My press is on the right and im right handed. Would seem very unco to me to load the press with my right hand and operate it with my left.
What is this thrower thing that clutters the bench......Chargemaster :P
I'm lefthanded. Press is on the middle right. Powder thrower on far left everything else not nailed down scattered through the middle.
I have that everything else scatterd down pat :PQuote:
Originally Posted by Barefoot
Actualy just sorted a supercheap tray setup in the weekend to put all my brass in number of fired lots :thumbsup:
SCA Organiser - 24 Compartment - Supercheap Auto New Zealand
Wife actualy gave it to me for Xmas....so pretty quick to set it up realy
Attachment 2285Attachment 2287This is my current set up and the desk. Note the water on the floor in the first photo as the bloody shed leaks like a sieve. New set up is going inside into the spare room though still storing the powder and such outside in shed (as per law). Green stand is for powder thrower, which leaves left of bench for work. I keep all my tools in an ammo container as the shed is seldom below 80% humidity.Does anyone have a good set up for their powder measure?
That would be super handy if my shed wasn't so leakyQuote:
Originally Posted by leathel
