Thread: Reloading Kits

This what you will need. BUT only about half of that gear to start out.


“O” (best) or a solid “C” Frame 7/8” press, some come with the priming tool.
Priming tool.
Shell holders to suit the cartridge
Dies- Lee RGB are the cheapest to get you started. ~$60
Loading block(s) Buy or easy to make
Sizing lube-grease will get you by.
Powder funnel
Powder scoops will do the job.
OR better Scales - Beam beam are good.
Trimmer.
De-burring tool(s)
Powder measure. (If you load lots) Lee Perfect powder measure is very good.
Trickler, but easy to make.
Components, Powder, Primers Projectiles, Cases

http://www.adiworldclass.com.au/data-rifle/