Reloading Kits

Quote:

---

Originally Posted by ONYVA

@recce I have this lot for sale, every thing you need to get started except dies $550 firmAttachment 286699

---

Thanks Onyva, I have already started acquiring bits, apparently there's a for sale section on here somewhere, I'm sure it would be snapped up there.

Attachment 286945

Here's some bits and bobs i have 3d printed, the funnel is pretty cool, it has a threaded adaptor for each cartridge size and fits nice and snug.
A little measure scoop.
A funnel that screws to the powder containers.
And a couple of reloading blocks.

They look like a good start.

For sale is here

https://www.nzhuntingandshooting.co.nz/f13/

The shopping list is getting shorter.


“O” (best) or a solid “C” Frame 7/8” press, some come with the priming tool.
Priming tool.
Shell holders to suit the cartridge
Dies- Lee RGB ~$60

Sizing lube-grease will get you by.
Powder scoops will do the job. (DIY)
Scales - Beam are good.

Trickler, but easy to make.
Components, Powder, Primers Projectiles, Cases

Trimmer. (Later)
De-burring tools (Later)
Powder measure. (Later)

Don't over think it.

https://youtu.be/pp1YG-KLN8c?si=6ftEHbPl1Q6E4n8a