Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Darkness DPT


User Tag List

+ Reply to Thread
Results 1 to 15 of 15
Like Tree5Likes
  • 1 Post By GWH
  • 1 Post By nor-west
  • 1 Post By Tahr
  • 1 Post By yerimaginaryM8
  • 1 Post By jono7

Thread: Remington Mod 7 Saum

  1. #1
    Member
    Join Date
    Dec 2011
    Location
    Perth
    Posts
    1,932

    Remington Mod 7 Saum

    All right you knowledgeable buggas, Mod 7 Saum whats the longest/heaviest bullet that will mag fit and still give decent speed in 7mm (current barrel) and in 300 (spare barrel)? Currently running accurate 150 ELD load at around 3050 fps in a 22 inch barrel, load developed by @Tahr. @GWH

  2. #2
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,456
    My 162 Amax load is seated too long to fit mag. Its doing 3k from 22 inch.

    I run a good old 150 SGK as a mag fit stalking load. Also right at 3k.

    You could always test the 162 seated to mag length and see how it shoots, won't be able to fit as much powder in but then case capacity will be less so maybe similar pressure.

    Sent from my SM-G930P using Tapatalk

  3. #3
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,813
    150 Nosler Ballistic Tip

    150 Hornady ELD
    A big fast bullet beats a little fast bullet every time

  4. #4
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,451
    what powder you running ? Loads with 162 AMAX in my 7mmSAUM with 2217 top out at around 2900 fps (standard 22 bbl). Am going to try N560 and RL26 next.

  5. #5
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,456
    Quote Originally Posted by chainsaw View Post
    what powder you running ? Loads with 162 AMAX in my 7mmSAUM with 2217 top out at around 2900 fps (standard 22 bbl). Am going to try N560 and RL26 next.
    Im using 67.5gr of 2217 at an OAL of 2.970"
    chainsaw likes this.

  6. #6
    Member Brian's Avatar
    Join Date
    Dec 2011
    Location
    Upper Hutt
    Posts
    1,327
    Those federal fusion projectiles shoot realy well in all the calibers and loads we've tried so far. might be worth trying some 160's.

  7. #7
    Member
    Join Date
    Dec 2017
    Location
    Geraldine
    Posts
    371
    Yep try the Federal Fusion.

    Incredibly accurate, even the factory ammo I shoot, its it's awesome. Iv given up buying anything else, they don't get any deader.

  8. #8
    Member
    Join Date
    Aug 2018
    Location
    Napier
    Posts
    117
    Quote Originally Posted by GWH View Post
    Im using 67.5gr of 2217 at an OAL of 2.970"
    Is it surpressed? seems quite fast for that combo etc

  9. #9
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,456
    Quote Originally Posted by Ham 7mm View Post
    Is it surpressed? seems quite fast for that combo etc
    yes, DPT magnum with 6 baffles

  10. #10
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    11,915
    Nor-west I would like to buy it back-any chance?

  11. #11
    Member
    Join Date
    Dec 2011
    Location
    Perth
    Posts
    1,932
    @Tahr what have got to swap, Sako A7 or something similar?

  12. #12
    Member
    Join Date
    Dec 2011
    Location
    Perth
    Posts
    1,932
    Quote Originally Posted by GWH View Post
    My 162 Amax load is seated too long to fit mag. Its doing 3k from 22 inch.

    I run a good old 150 SGK as a mag fit stalking load. Also right at 3k.

    You could always test the 162 seated to mag length and see how it shoots, won't be able to fit as much powder in but then case capacity will be less so maybe similar pressure.

    Sent from my SM-G930P using Tapatalk
    Ok going to try the Speer 160 btsp seems to be same length as the 150 ELD so should get a good case of powder in there. Im old, I like bullets with lead in the front.
    GWH likes this.

  13. #13
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    11,915
    Quote Originally Posted by nor-west View Post
    Ok going to try the Speer 160 btsp seems to be same length as the 150 ELD so should get a good case of powder in there. Im old, I like bullets with lead in the front.
    Ive got Speer 160 grn flat base here you can have.
    nor-west likes this.

  14. #14
    Member
    Join Date
    Jan 2012
    Location
    allover
    Posts
    431
    I used N165 in my saum gave good speed with 162 amax, it is what G Duley recommended for Saums a few years back. I have read anecdotal reports on the web by comp shooters that it gives good barrel life too
    nor-west likes this.

  15. #15
    Member
    Join Date
    Jul 2019
    Location
    Hamilton
    Posts
    238
    I was getting 2930 with mag fit 168vld's and 57.3gns V100 suppressed 22" barrel. Slowed them down now by chopping the barrel back to 18"
    nor-west likes this.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!