Seeking Press Recommendations

After thousands of rounds my old RCBS Rock Chucker has finally got too much wear in it. It is no longer able to maintain concentricity when sizing necks using Redding type-S bushing dies. These are the dies that don't have a sliding sleeve to hold the case concentric when offering the necks up to the bushings and pretty much rely on the press presenting the neck to the bushing just so-so so that the bushing will compress the neck in evenly. This it no longer can achieve because the ram is a now a bit wobbly.

Any recommendations please for a replacement? At the moment a new Rock Chucker at $400 is top of the list, but open to suggestions. I'm not needing a progressive press, just the basic 7/8x14, but true by design & manufacture.

Had a look at the redding boss or boss two?

Even if you only load one calibre you should seriously consider a turret press. Really convenient as you just set it all up once and rotate between dies.
I started with a Lyman turret and a few years ago upgraded to a Redding T7. Load everything from .223 to .338 Lapua on it, great bit of kit.

Good review on it here from the guys at Moss Pawn & Gun (iraqveteran8888)
www.youtube.com/watch?v=3nGRrBs5Clo

That MEC marksman looks a good press. Should be well priced even with freight?

Never had issues with my Lee Turret Press....

I've got nothing to compare it to as it's the only one I've ever used but the forster co-ax has worked brilliantly for me. Built solidly, looks like it will last a life time.

http://https://www.forsterproducts.com/product-category/case-sizing-lubricating/co-ax-reloading-press/

Forster co-ax press also.
Doubt you can really go wrong with any new press though to be honest.

I wouldnt buy another Lee, the aluminium bracket that holds the handle just broke on mine

Thanks for the replies. In the meantime I've ordered a Redding Competition bushing die to replace the S-type.
I'll see if the sliding sleeve takes out the slop in the current press.

Quote:

---

Originally Posted by Moutere

Forster co-ax press also.
Doubt you can really go wrong with any new press though to be honest.

---

+1

Never regretted buying mine but they cost an arm and a leg if you can find one.

Quote:

---

Originally Posted by PJC

I wouldnt buy another Lee, the aluminium bracket that holds the handle just broke on mine

---

Common issue on the challenger press, you can buy new ones easily enough. Titan reloading can help. Mine lasted about 8 years, now repaired I use it for decapping/ priming.

Quote:

---

Originally Posted by SlimySquirrel

That MEC marksman looks a good press. Should be well priced even with freight?

---

looking at one of these myself

My Lee Classic Cast O-frame has been giving me excellent results. Cast iron frame and all-steel linkages, compound leverage easily handles full-length sizing of my .30/06 loads.

Still using a Lyman Spartan single stage C press purchased in 1973. If I had to I would replace it with another cast iron single stage. Lots of choices, but I would probably look for another Spartan. A second-hand one with less miles on the clock.

Quote:

---

Originally Posted by Willus

looking at one of these myself

---

Where you gonna buy from? Might get one at some stage.

Quote:

---

Originally Posted by gundoc

My Lee Classic Cast O-frame has been giving me excellent results. Cast iron frame and all-steel linkages, compound leverage easily handles full-length sizing of my .30/06 loads.

---

I'm swaging 9mm bullets on mine.

RCBS SUMMIT

Quote:

---

Originally Posted by SlimySquirrel

That MEC marksman looks a good press. Should be well priced even with freight?

---

They look good, I like how they are open at the front & the floating shell holder.

The Redding Competition neck sizing die arrived and is delivering concentric sizing, so the need to replace the press has been bypassed this time. The other Competition dies here also size concentrically so there was some confidence in this being a good work-around.
I've got a soft spot for the old RCBS and didn't really want to retire it if it could have been avoided

Nice. I have an old RCBS early model rock chucker. Must be 30 or 40 years old. I got it secondhand and works great.

Quote:

---

Originally Posted by SlimySquirrel

Where you gonna buy from? Might get one at some stage.

---

ill pm you