Hope It sucks for all you barstards because I am working
Na best of luck boys, may the stags fire up and the weather be kind to all.
"Hunting and fishing" fucking over licenced firearms owners since ages ago.
308Win One chambering to rule them all.
So pressure maxed out at 2730ish fps for 2209, won't say how many grains as it's way over book max (either my chamber is sloppy or my batch of 2209 is slower burning or something). Got a faint extractor mark on the top load I tried, and no speed gain from the load .2gr below, so that's about the top end for my 19.4" barrel & the amax
Have had issues with inconsistent accuracy, a load will group nicely sub-moa for 5 when tested, go back to confirm it and it's shit (1.5moa). Not sure why. Using new un-sized lapua brass, could be that, kinda doubt it though
Am planning on shortening my OAL about .040 from what I've been using and running through again to see if it helps (promising results from testing a few loads with shorter OAL). Also going to try the 142gr SMK. The "first round fliers" I was experiencing seem to be due to the 2.92" loaded rounds not quite feeding the first round in the mag right. Feeds perfectly shortened slightly and no more first round fliers.
Finnlight is much fussier than the R8 for loads, pretty much everything shot one hole with R8, I just picked the fastest load....
What speeds do you think you'll get using the 142smk's?
VIVA LA HOWA
Presumably similar to the amax, they're a similar bearing surface length etc and only a tiny bit heavier
Bookmarks