Thread: Sizing die trouble

Originally Posted by 30.06king

Maybe, but if so I would think he would not be decapping cases either if it was that high. So, if successfully decapping the expander is probably positioned OK. But, if the expander is set too high within the die it might cause an issue ... ??

If the decapping pin isn’t pushed fully in you can lock them in place screwing on the expander so it is possible to deprime and have the expander too high up in the die still. Might be more likely in a smaller cartridge. I did this with one of mine, can’t remember what cal but it was a Redding die.