...................................wait!!
Printable View
Ha ha, yep definitely expected to get called a loser, I guess nobody love me anymore!!!
As soon as I get a chance I’ll have a play and post results.
Cheers guys.
I thought you were to busy to play with guns!!!!!
I am!!
Just wishful thinking:-)
Measured them tonight and according to the hornady book they are in spec.
Buggered if I know, they definitely won’t chamber.
Maybe bullet seated too long and hitting the lands before case is fully chambered?
More likely a brass size issue though, e.g. chamber at the small end of normal specs, cases at the upper end.
I would pull a bullet and see if the empty case chambers.
Bullets not seated too long.
Rifle chambers factory ammo fine.
Tried a body die too, went through that fine.
Measured all dimensions with verniers and compared to hornady book, all within spec.
I have a small base die but when pushing a round in by hand it feels tight and I’m worried I will get a live round stuck.
Run them through a FL bushing die with the bushing removed so it doesnt fuck with the neck tension
body die, or FL bushing die and take out the bushing and decapper
They go through a rcbs body die and still don’t chamber.
Waiting on Sheridan case gauge to show up, then I guess I’ll buy a small base body die, lucky I’m stubborn because I will have spent more on fixing the problem than the ammo was worth!!