Thread: A then c and b??

I full length size everything, only trim to length the first time I load a case and then wouldn't bother untill they start getting excessive, havnt had to trim to length twice as I havnt used any brass for more than two firings yet. Clean brass will run a lot smoother through a full length die and require only the tiniest bit of lube, I use Unique as a tiny little bit goes a long way and I have never dented a shoulder with it unlike the Lee lube, too little and end up with stuck cases, tiny bit more and end up with dented shoulders. I prime on the press so empty brass is cleaned, sized plus de-primed plus re-primed, neck chamfered, then loaded