Tikka’s .243 Win change…. 1:8” twist!

As long as it will still shoot an 85 grain Sierra BTHP the world will still turn. But if it only shoots heavy bullets well I am not interested.

Flyblown for some reason I can't quote a message I would not bother trying they're not real good coming forward with information and it will just be a standard saami chamber as per the usual.

Quote:

---

Originally Posted by caberslash

They are too busy churning out over-priced crap... like the new '100'

On a serious note, the cold hammer forged barrels will be shared between Sako and Tikka, so it would be surprising if twist rates were not improved on the Sako as well.

Anyone else seen the quality of new Tikka's go down the pan whilst the price has gone through the roof?

I have a work T3 and a T3x myself. The minor improvements in the T3x were nice but the T3 has a smoother feel to the action and nicer trigger.

Meanwhile a mate bought a brand new T3x CTR in 6.5 Needmore last year and the trigger was terrible, proper 'American' weight even at the lightest setting.

Suspect Beretta is turning the screws on Tikka since Beretta have come out with their own rifles. Crazy to think the Yanks were getting T3's for $800 new at one point. No wonder Remington went bankrupt... :oh noes:

---

Can you explain the trigger issue. My mate has just bought a 223 T3X . I reload for him and he is head shooting in my presence. He is not complaining about the trigger. I swore off Sako though this is after my 75 which is a real ripper in 243 but the new stuff leaves me cold. Cheers.

Quote:

---

Originally Posted by deye223

Flyblown for some reason I can't quote a message I would not bother trying they're not real good coming forward with information and it will just be a standard saami chamber as per the usual.

---

What anbout the aussie Waterman mags. They have an extended capacity.

Quote:

---

Originally Posted by TeRei

What anbout the aussie Waterman mags. They have an extended capacity.

---

I use these magazines and they are very handy.

According to Beretta NZ, the magazine is the same. I have asked Sako.fi directly about the freebore but as commented above it will almost certainly be standard SAAMI.

I don’t think it really matters that much. I did a little back of the envelope check this arvo and I don’t think the velocity gains by having the projectile seated way out is going to make a huge difference on downrange performance.

Just being able to shoot the high BC 6 mm projectiles is good enough.

Quote:

---

Originally Posted by Bill999

its a tikka just get the 30-06 mag if its a problem

---

Or the M+ length magazine for 6.5 Creedmore would probably work fine too

Tikkas generally have long free bores don’t they? Iv got a .243 with a 108eldm loaded as a dummy round I will measure later and someone will be able to chime in as to weather it’ll fit or not

Talked to a farmer on Sunday evening about deer on his farm. Too many. Someone chimed in at the pub [where he drinks] about a flash harry calibre... Creedmoor. He looked at me and said it sounds like garbage and would I get my son up to sort them out with an ordinary rifle.

Quote:

---

Originally Posted by Kelton

Tikkas generally have long free bores don’t they? Iv got a .243 with a 108eldm loaded as a dummy round I will measure later and someone will be able to chime in as to weather it’ll fit or not

---

No they don't my tikka varmint 1:8 twist had exactly the same chamber setup as my Howa 1:8 bloody ridiculous trying to seat 75 grain and 80 grain pills .

Quote:

---

Originally Posted by TeRei

Can you explain the trigger issue. My mate has just bought a 223 T3X . I reload for him and he is head shooting in my presence. He is not complaining about the trigger. I swore off Sako though this is after my 75 which is a real ripper in 243 but the new stuff leaves me cold. Cheers.

---

Extremely heavy with what felt like creep to me (it's not a two stage).

Saying that, I have been spoilt by TriggerTech Specials (both single and two stage).

Can't recommend buying a new Tikka T3x anymore as the prices have gone insane over here in the UK (over £1k+ for the very base model!).

Better to buy an old Remington 700 or M7 if you know what to look for and do it up. The detachable magazines on the Tikka's are also a rip (£50 for a new one!)

Righto I got a reply from Marko at Sako to tell me that the new 8 twist .243 magazine is the same as before (so capable of holding all .243 cartridges within CIP maximum length). He completely ignored the questions regarding freebore and didn’t answer. Woopee.

The chambering will therefore be the same as before I would assume, i.e. conforms to CIP standard.

so get any half competent gunsmith to run longer throated reemer up its gunger if its that big of issue....yes will void warrantee...yes will cost you..but if thats what you want,what you really really want......... job done,yoU will be able to sight it in,develop load for it,work out its precise load charge weight and seating depth,then probably get bored with it,Sell it at a loss and go back to using the bog standard .308w sitting in cupboard AGAIN.....

Quote:

---

Originally Posted by Micky Duck

so get any half competent gunsmith to run longer throated reemer up its gunger if its that big of issue....yes will void warrantee...yes will cost you..but if thats what you want,what you really really want......... job done,yoU will be able to sight it in,develop load for it,work out its precise load charge weight and seating depth,then probably get bored with it,Sell it at a loss and go back to using the bog standard .308w sitting in cupboard AGAIN.....

---

Such a wit. But more than a kernel of truth.

Evidently there are no tikkas in the country as yet in 1:8 so will hold off getting one

Quote:

---

Originally Posted by deye223

No they don't my tikka varmint 1:8 twist had exactly the same chamber setup as my Howa 1:8 bloody ridiculous trying to seat 75 grain and 80 grain pills .

---

.223?