Just got a mate that bought one of these.
Has any one done a load for the hornady 175 eldx with adg brass and 2217?
just to get up and going!
Sent from my SM-A556E using Tapatalk
Printable View
Just got a mate that bought one of these.
Has any one done a load for the hornady 175 eldx with adg brass and 2217?
just to get up and going!
Sent from my SM-A556E using Tapatalk
https://www.adiworldclass.com.au/dat...tridge-7mm-prc
If you think just straight up copying somebody elses recipe is a good idea you should stick to factory ammo.
I recon he should stick to factory ammo to[emoji23]
Sent from my iPhone using Tapatalk
Where did he say he was gonna straight up copy it ? :O_O:Quote:
Originally Posted by STC
I was going to use that as a starting point and go up in five grain increments till the action exploded to see where pressure is.Quote:
Originally Posted by STC
But thanks for your concern!
Sent from my SM-A556E using Tapatalk
Quote:
Originally Posted by andyanimal31
Andy, if it helps... 66.85mm CBTO w/.283Mandrel, Fed 215Primers, 72.3Gr Ar2225, ADG Brass, im basically just below max pressure... so dont start there if you use this for reference ;)
Thanks Lars!Quote:
Originally Posted by Larskramer
Is that in a tikka factory chamber?
Sent from my SM-A556E using Tapatalk
Ar2213sc is another good candidate;-)
Yep had a gander at my hornady app and adi so got the 3 relevant powders I might need.Quote:
Originally Posted by Friwi
2217 I do like!
Good thing is tikkas pretty easy to get going
Sent from my SM-A556E using Tapatalk
nope, 22inch proof, pierce tiQuote:
Originally Posted by andyanimal31
You do all the testing Andy then let me know.Quote:
Originally Posted by andyanimal31
I'm about to start on my Tikka 7PRC this week but I'm going to use 180 ELDM.
Sent from my CPH2531 using Tapatalk