I am getting a raised rim after sizing brass?
Attachment 14224Attachment 14225
Printable View
I am getting a raised rim after sizing brass?
Attachment 14224Attachment 14225
Your rifle has a large chamber I would guess
Thought you sorted this with the new dies??
Now its gettin exciting!
Who is removing the left one if your wrong?
Sent from my GT-S5360T using Tapatalk 2
Say good by to lefty! its a tikka, shoots bloody well just have trouble reloading fired brass. thought I would see what people thought
might need new sizing die?
I have seen this with a number of differant calibers and differant brass
Do the loaded rounds shoot well and do they chamber and extract with no problems if they work ok whats the problem
can be very tight to chamber
Just neck size?
While not really a problem it could in theory shorten your case life working the web body junction and lead to case head separation.
But i would have thought necks would give up first as long as you are not over sizeing and creating excessive head space.
Sent from my GT-S5360T using Tapatalk 2
So is it a rusty knife or hammer James? :D:D:D
Sent from my GT-S5360T using Tapatalk 2
two river rocks and a rusty knife to hold the righty to one side????