Thread: Bore sight Lazer way off when rifle is zeroed

Originally Posted by Happy Jack

I used the method promoted by who tee who on Youtube for my take down rifle since it is hard to bore sight a rifle that has no bolt.

At 10 yards set up a target.

Measure from centre of barrel to centre of scope.

Mark 2 points on the target using above measurement.

Aim at top mark, shoot you should hit pretty close to bottom mark.

Adjust scope as needed to hit bottom mark.

Move target to 100m aim at centre point. Fire!

Adjust scope as needed but you should be near enough there.

I would argue its just as easy if not EASIER to do it with a break open rifle. that black n decker workmate comes in real handy to do it..... with rifle broken open you have access to look through bore and still look through scope......