Thread: Tikka T3: Boyd stock, AICS mags and Bottom metal

I bought all this at the end of last year for a bit of a project/experimentation but lost interest and haven't ended up using any of it, so may as well sell it on.
I'll put the prices first, then a description and pictures last.
All prices are shipped, but if tracking is wanted to a rural address will have to add a little ($3.00 extra I think). Any questions just ask away, or send a PM.

Stock - $50
Bottom metal - $100
Accuracy international 10 round 223 mag - $80
Magpul AICS 5 round 308 mag - $50

The stock is a Boyds laminate stock which has been glass bedded by the previous owner and it's inletted for the AICS bottom metal, looks like it's been done professionally. I didn't actually want the stock it just came with the bottom metal, so I haven't used it.

Not sure on the make of the bottom metal, but it's aluminium and anodized black, is well made and in good condition.

Branded plastic accuracy international 10 shot 223 magazine, a bit of wear from use but good condition, looks like the outside of the feed lips have been ground slightly so that it'll work in the Tikka action. I haven't used the magazine in a rifle, but have loaded rounds into it and holds 10 fine.

Magpul 5 round 308 magazine, outside of the feed lips have been ground down too fit a Tikka action, good nick otherwise. Have loaded it up and is in working order.

Stock please pm incoming

Have been inundated with PMs, will reply to them all in the order I received and update on here.

Stock, metal and 308 mag SPF.

223 mag still available.

Deleted.

223 mag $70

Does the 223 mag allow longer oal?

Originally Posted by distant stalker

Does the 223 mag allow longer oal?

Yes, longer than the factory 223 magazine.
I can measure it tomorrow if you would like.

also keen on 223 coal.

Originally Posted by distant stalker

Does the 223 mag allow longer oal?

Just measured it, allows a COAL of 65mm vs the factor 58.5mm.
This should be more than enough to get a projectile to the lands, I have some 75gr AMAX loads that are seated .010" off the lands and they fit into the magazine fine.

@blair993

Everything has sold.

Cheers