Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Member
    Join Date
    Jul 2017
    Posts
    48

    WTB - Supressor for 6.5mm

    After an over-barrel suppressor to suit 6.5mm(.260). Not too worried about thread pitch as the barrel is currently un-threaded.

    Prefer a Hardy/Gunworks/DPT.

    Located in Auckland.

  2. #2
    Member
    Join Date
    Jul 2017
    Posts
    48
    UpdateCal doesn't matter, as long as the thread is 1/2" x20 or 28tpi.

  3. #3
    Member
    Join Date
    May 2015
    Location
    North island
    Posts
    1,058
    I have a sonic suppressor here(similar to a Dpt in regards to interchangeable baffles). Was on my brothers 308 but he put less than 20 rounds through it and never used the gun again so I am selling the suppressor. Mint condition just do not know the thread as not written on the bloody thing. Want me to try figure it out? Located in akl as well

  4. #4
    Member
    Join Date
    Jul 2017
    Posts
    48
    Quote Originally Posted by superdiver View Post
    I have a sonic suppressor here(similar to a Dpt in regards to interchangeable baffles). Was on my brothers 308 but he put less than 20 rounds through it and never used the gun again so I am selling the suppressor. Mint condition just do not know the thread as not written on the bloody thing. Want me to try figure it out? Located in akl as well
    That would be cool if you could confirm the thread for sure. Cheers

    Sent from my SM-G955F using Tapatalk

  5. #5
    Member
    Join Date
    Jul 2017
    Posts
    48
    Bump

    Sent from my SM-G955F using Tapatalk

  6. #6
    Member
    Join Date
    Jul 2012
    Location
    Tauranga
    Posts
    899
    Not over barrel, but i have a Jet Ultra ASE in 30 cal that is threaded 1/2 x 20 Check them out to see if its what you want. They are made for high round count use, so may be a bit heavy for you?

  7. #7
    Member
    Join Date
    Jul 2017
    Posts
    48
    Quote Originally Posted by johnd View Post
    Not over barrel, but i have a Jet Ultra ASE in 30 cal that is threaded 1/2 x 20 Check them out to see if its what you want. They are made for high round count use, so may be a bit heavy for you?
    Thanks John, I'll pass for now but keep it in mind. Barrels 24" so looking for over barrel ideally.

    Sent from my SM-G955F using Tapatalk

  8. #8
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Silverdale
    Posts
    2,145
    I think you’ll find that over barrel suppressors still end up about 4 in barrel forward. So the ASE is really no different in terms of overall length. They are a bit heavier but a very nice compact can with very good noise reduction.

  9. #9
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    2,354
    personally id just get a dpt
    Very light
    Good noise reduction
    Cheaper than others

    Cons you do have to look after them take them to bits and give them a spray with wd40 every time you use them
    Only a 30sec job while cleaning the rifle though
    The ali they use is prone to Corrosion but is very strong and light
    Which allows the suppressor to be light and compact
    Everything is a trade off

    As long as you follow dpt’s instructions ie a light spray of wd40 on all the internals after every use it will last a long time

  10. #10
    Member craigc's Avatar
    Join Date
    Dec 2011
    Location
    Upper Hutt
    Posts
    1,308
    I have a HRE 1/28 thread. Gen four; I think.

    I'd like $300 for it; 200mm long.

    Want a photo?

  11. #11
    Member
    Join Date
    Jul 2017
    Posts
    48
    Quote Originally Posted by craigc View Post
    I have a HRE 1/28 thread. Gen four; I think.

    I'd like $300 for it; 200mm long.

    Want a photo?
    Hi Craig,

    Yes please!

    Thanks

    Sent from my SM-G955F using Tapatalk

  12. #12
    Member
    Join Date
    Jul 2017
    Posts
    48
    Bump

    Sent from my SM-G955F using Tapatalk

  13. #13
    Member
    Join Date
    Mar 2015
    Location
    Whangarei
    Posts
    45
    hey mate I have a Gunworks over barrel that was fitted to my tikka 6.5 cut down to 20" i think its 1/2 by 20 tpi by memory is very quiet with excellent recoil reduction pm me if interested

  14. #14
    Member
    Join Date
    Jul 2017
    Posts
    48
    Quote Originally Posted by Taniwha_Hunter View Post
    hey mate I have a Gunworks over barrel that was fitted to my tikka 6.5 cut down to 20" i think its 1/2 by 20 tpi by memory is very quiet with excellent recoil reduction pm me if interested
    Pm sent

    Sent from my SM-G955F using Tapatalk

  15. #15
    Member
    Join Date
    Jul 2017
    Posts
    48
    Bump

    Sent from my SM-G955F using Tapatalk

 

 

Similar Threads

  1. WTB: ODL Supressor
    By robh500 in forum Buy, Sell or Swap
    Replies: 0
    Last Post: 21-11-2016, 06:05 AM
  2. 223 supressor
    By jakewire in forum Firearms, Optics and Accessories
    Replies: 16
    Last Post: 25-02-2016, 06:34 PM
  3. 223 supressor
    By jakewire in forum Buy, Sell or Swap
    Replies: 3
    Last Post: 12-12-2015, 08:18 PM
  4. 357 mag supressor
    By rambo-6mmrem in forum Buy, Sell or Swap
    Replies: 1
    Last Post: 07-05-2014, 08:16 AM
  5. WTB .22 supressor
    By Pengy in forum Buy, Sell or Swap
    Replies: 11
    Last Post: 04-03-2014, 02:53 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!