Got gun city to cut my brand new tikka t3x superlite down to 16" and the hushpower suppressor i have dosent fit, I'm sure someone has done this before, does anyone know what suppressors fit? Cheers allAttachment 226747Attachment 226748
Printable View
Got gun city to cut my brand new tikka t3x superlite down to 16" and the hushpower suppressor i have dosent fit, I'm sure someone has done this before, does anyone know what suppressors fit? Cheers allAttachment 226747Attachment 226748
Yup, go get a DPT
Sent from my SM-S911B using Tapatalk
DPT will fit it..... they are fatter and shorter in rear chamber than my spartan....
Yep dpt dims from the website
215mm total length
95mm forward of the muzzle
So 120mm from muzzle back
Couple of pics, this is a DPT on a 14.5 inch barrel https://uploads.tapatalk-cdn.com/202...a4566d20ae.jpghttps://uploads.tapatalk-cdn.com/202...8f54e985bc.jpg
Sent from my SM-S911B using Tapatalk
Bloody legend, will order asap cheersQuote:
Originally Posted by HNTMAD
Go and see Friwi. Save yourself some grief.
Have a dpt on my 16 inch Tikka. Heaps of room left.
Hardy suppressor will fit and work good.
A mate has a new gun city suppressor that looks like only 4 or 5 cm back behind the muzzle. Works well for him on an 18 incher.
If you go DPT you can take off a couple of modules from the from the front and save yourself several cm of scrub catching over head branch hooking length.
See Friwi. He is a bloody genius for balance and advice. Rate him highly.Quote:
Originally Posted by Bagheera
Where is friwiQuote:
Originally Posted by TeRei
Just back from the bush.
So 16” tikka will work fine with mk2 standard suppressor. You can even go down to 15 3/4” but not shorter otherwise we start digging in the stock.
And 17 3/4” with the magnum.
Thanks all, got a dpt fits perfectly looks great cheers
Attachment 227851
This is the Pitting after 13 shots, normal?? Remington core-lokt
I would say yes my 16 inch 308 was same, s/s baffle is the go with short barrels. They are pretty hard on suppressors being that short there is a lot more heat an pressure I thinkQuote:
Originally Posted by Blisters
That's pretty bad. I had a stainless baffle on my 7mm08 and it was spotless after a couple of hundred rounds. The aluminium baffle on my 300BLK is also perfect after a similar number of shots, but obviously, it has a much lower muzzle energy.
Pretty normal like others have said if you are worried get a SS baffleQuote:
Originally Posted by Blisters
Sent from my CPH2145 using Tapatalk
Thanks Guys have ordered a stainless baffle
I wouldnt stress this is mine after 150 rounds 7saum hasnt got any worse their is cleaners that are recomended when I opened this their was a fair bit of blue deposits likly carbon probably done more harm just now sticking it in the vise and trying to separate the other 3 baffels
Yeah my 17" 223 corroded the first baffle on the initial trip to range. But has settled down with not noticeable wear since then.
One of the great things with DPT is that you can actually monitor what is happening. God knows what is going on in a sealed surpressor.
Yip you could even do baffle rotations to share the wear if you are onto it enoughQuote:
Originally Posted by Dama dama
