Printable View
I've got a Tippmann here that I've binned the factory sights and installed the sights that came on my Sig 516 (ahh..the memories...)
I never used them on the Sig as I ran a scope so I'm trying to figure out how to sight them in.
Windage is easy but from what I understand elevation is adjusted by adjusting the front post. Is there a special tool I'm missing to do this? Or can I just grab it with some pliers or something and start twisting away?
Attachment 211005
That image looks like it has a detention pin allowing for quarter turn adjustments. ,I can’t tell you how to adjust it but however that is done, screwing it down will raise your shot placement and screwing it up will drop the shot placement.
have i got the deal for you. i have a unused leatherman tool made for the AR and it includes the tool to let you adjust the sights
Just depress pin and rotate
Sounds like the advice I've received from several Govt departments lately. So helpful...Quote:
Originally Posted by m101a1
But, in this case it's right - you can get a poncy tool to depress the retention pin and then turn the sight post nut which should be a squared post arrangement with threads on the corners of the square. The nut is captive, the post moves up and down inside it's square hole - I can't recall the adjustment steps off the top of my head but that's how the bog standard one worked. If you were cunning and patient you could wrangle a 'fine adjustment' buy unscrewing the post and turning it a quarter turn or a half etc and then screwing it back in...
Hmmm how much do you want for it? I might be interested.Quote:
Originally Posted by gonetropo
Made to use the tip of a 223 bullet to push down the plunger diagonally and off you go
https://www.guncity.com/leatherman-m...5-tools-244606Quote:
Originally Posted by 300CALMAN
will take 1/2 price at 250
