Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Darkness DPT


User Tag List

+ Reply to Thread
Page 2 of 5 FirstFirst 12345 LastLast
Results 16 to 30 of 71
Like Tree34Likes

Thread: Advice for new 223

  1. #16
    Member Liam258's Avatar
    Join Date
    Mar 2018
    Location
    Waipu
    Posts
    238
    I too have had the idea of purchasing a light weight .223.

    Reading another thread it appears Ken Henderson is developing a Howa mini action stock. And another option was an MPI stock from Canada. Here is the thread below:

    https://www.nzhuntingandshooting.co....-action-57451/

    Broncos were going to bring in Howa mini action EXCL Lite chassis which weighs 500g. The original howa stock weight approx 974g.

    https://broncos.co.nz/hunting/gun-pa...l-lite-chassis

    That maybe another good option?
    ANOTHERHUNTER likes this.

  2. #17
    Member
    Join Date
    Aug 2019
    Location
    Northland
    Posts
    62
    Quote Originally Posted by cameronjackwhite View Post
    Ken henderson does inlet for the model 7. $1100 odd with an aluminum v block if I recall. It may not be a kimber but nothing wrong with the trusty mod 7
    Thats what I wanted to hear .thanks
    Last edited by wire hunter; 23-04-2020 at 11:14 AM.

  3. #18
    Member
    Join Date
    Aug 2019
    Location
    Northland
    Posts
    62
    Quote Originally Posted by Bill999 View Post
    I still think the best 223 is a 243 when it comes to Kimber montanas
    the action is designed for 308 length and the 223s just have a block in the magazine and smaller shorter follower
    the follower that they use in the 223 is dog shit and loves to tip or i just need a new spring for it
    the both my 243s feed flawlessly and are externally identical to the 223

    and well the 243 hits a lot harder for a tiny bit more recoil
    Thats interesting. I've never handled a kimber montana or a model7 for that matter so good to hear things like that. this purchase will most likely be done with out seeing either in the flesh. When I bought the cz I had only seen pictures and read about them. the safety took me by surprise and I still don't really like the way it is moved back to fire. Also this rifle has to be 223 for my goat work.
    Last edited by wire hunter; 23-04-2020 at 11:15 AM.

  4. #19
    Member
    Join Date
    Aug 2019
    Location
    Northland
    Posts
    62
    Quote Originally Posted by Liam258 View Post
    I too have had the idea of purchasing a light weight .223.

    Reading another thread it appears Ken Henderson is developing a Howa mini action stock. And another option was an MPI stock from Canada. Here is the thread below:

    https://www.nzhuntingandshooting.co....-action-57451/

    Broncos were going to bring in Howa mini action EXCL Lite chassis which weighs 500g. The original howa stock weight approx 974g.

    https://broncos.co.nz/hunting/gun-pa...l-lite-chassis

    That maybe another good option?
    That Howa option keeps popping up, a lot cheaper than the other two.
    On a completely different note how do you link another thread into a post? Cheers

  5. #20
    Member
    Join Date
    Jul 2017
    Location
    Bay of Plenty
    Posts
    140
    X-bolt .223 with 1:8 twist, at least a couple of models manufactured.
    wire hunter likes this.
    Just going to take a look around the next bend...

  6. #21
    Member Liam258's Avatar
    Join Date
    Mar 2018
    Location
    Waipu
    Posts
    238
    Quote Originally Posted by wire hunter View Post
    That Howa option keeps popping up, a lot cheaper than the other two.
    On a completely different note how do you link another thread into a post? Cheers
    I just copy the link in from my browser and paste into the comment box. Cheers
    wire hunter likes this.

  7. #22
    Member
    Join Date
    Jan 2014
    Location
    Hastings
    Posts
    70
    [QUOTE=wire hunter;991657]@wire hunter I have talked to outdoor supplies and they cant help me with the 223 caliber. Waiting to hear back from rivers to ranges.
    Pretty sure there was 1 on the rack at rivers to ranges pre lockdown. someone will be instore from tuesday next week i think
    Last edited by sdogg73; 23-04-2020 at 01:56 PM.
    wire hunter likes this.

  8. #23
    Member
    Join Date
    Aug 2019
    Location
    Northland
    Posts
    62
    thanks for the feedback. Can anyone else comment on how well or not the Kimber and remmington model 7 in 223 feed there rounds. @Bill999 was having some issues with his kimber 223 feeding. Also what are both rifles like to feed fresh rounds into the mag well on the fly as in quickly while animals are running away. Im guessing neither are control round fed? Cheers

  9. #24
    Member
    Join Date
    Jul 2017
    Location
    Bay of Plenty
    Posts
    140
    I've got a stainless steel Model 7 in .223 that I've had for about 20 years and it's an awesome little gun, it's had the trigger worked , 1/2 cock added to the action (not to hunt with the gun on half cock - but that's another story) action bedded and the forend relieved, barrel threaded for suppressor, it will shoot 0.5 moa or better any day you like. It also spent a week on the bettom of a river for a week until it could be recovered after an incident involving a kayak, a flooded river and a rock, luckily it was in a scabbard and is none the worse for wear, even the bullets in the magazine all went off fine after their immersion. I have a couple of X-bolts and have set up another two for mates and like all guns ever made they have some features that could be better, however you do get a stock that has good feel, tang safety (shotgun style), 60 degree bolt lift, well engineered short action, flush fitting rotary magazine that in my experience feeds faultlessly, 1:8 twist barrel to shoot heavy bullets, and with Talleys mounts a clean and practical setup. There are a couple of models available here, the stainless stalker and the fake carbon stock 16" barrel model which is threaded for a suppressor.
    wire hunter likes this.
    Just going to take a look around the next bend...

  10. #25
    Member
    Join Date
    Aug 2019
    Location
    Northland
    Posts
    62
    Quote Originally Posted by 38 South View Post
    I've got a stainless steel Model 7 in .223 that I've had for about 20 years and it's an awesome little gun, it's had the trigger worked , 1/2 cock added to the action (not to hunt with the gun on half cock - but that's another story) action bedded and the forend relieved, barrel threaded for suppressor, it will shoot 0.5 moa or better any day you like. It also spent a week on the bettom of a river for a week until it could be recovered after an incident involving a kayak, a flooded river and a rock, luckily it was in a scabbard and is none the worse for wear, even the bullets in the magazine all went off fine after their immersion. I have a couple of X-bolts and have set up another two for mates and like all guns ever made they have some features that could be better, however you do get a stock that has good feel, tang safety (shotgun style), 60 degree bolt lift, well engineered short action, flush fitting rotary magazine that in my experience feeds faultlessly, 1:8 twist barrel to shoot heavy bullets, and with Talleys mounts a clean and practical setup. There are a couple of models available here, the stainless stalker and the fake carbon stock 16" barrel model which is threaded for a suppressor.
    Ok that xbolt is interesting, comes in a fair bit cheaper than model 7 with after market stock. Still think i would chose Mr 7 need to get to a shop for comparison, DAm it thats ages away

  11. #26
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,811
    Quote Originally Posted by wire hunter View Post
    thanks for the feedback. Can anyone else comment on how well or not the Kimber and remmington model 7 in 223 feed there rounds. @Bill999 was having some issues with his kimber 223 feeding. Also what are both rifles like to feed fresh rounds into the mag well on the fly as in quickly while animals are running away. Im guessing neither are control round fed? Cheers
    I rebarreled to 300blk which has far shorter a case bearing surface, as 223 with a stiff spring I'm sure they would be fine
    Iv reduced mine with a plastic block to three in the mag and now it's awesome as 3 + 1 feeding wise with the mag spring compressed
    And I'm using blunt nosed subsonic bullets which Iv had trouble with in my sako as well, pointy bullets just feed better

    I just wanted to emphasise as a 243 they are just better but if you need x caliber for contracts that's different
    223 is a comprise to fit the smaller case. Still an awesome tiny action for the 223 that I'd far rather have over any push feed
    I'd buy one to replace my howa mini in a heartbeat but they don't come up often at reasonable prices now that ar15s are no longer an option

  12. #27
    Member
    Join Date
    Aug 2019
    Location
    Northland
    Posts
    62
    SWeet @bill999 was just about to pm you regarding the feed issue. In regards to the action is it smaller than say the tikka but Im guessing larger than cz527 if you have seen one? somewhere inbetween.

  13. #28
    Member
    Join Date
    Aug 2019
    Location
    Northland
    Posts
    62
    Just so I no when I tag someone with @Bill999 for example does that person get notified they have been tagged in post? cheers

  14. #29
    Member
    Join Date
    Nov 2018
    Location
    Matamata
    Posts
    1,737
    Yep, long as you spell it right @wire hunter
    wire hunter likes this.

  15. #30
    Member
    Join Date
    Sep 2017
    Location
    BOP
    Posts
    482
    I've got a South Fort Labs carbon stock fitted to my CZ 223 and mil-spec coated. Also got a Kimber Montana in 7mm-08. If you don't like the CZ safety (backwards to Tikka) you might hate the Kimber safety, personally I think they're unusable for quick and quiet release of safety.

 

 

Similar Threads

  1. Some advice please on a new .223
    By Nworbmij16 in forum Firearms, Optics and Accessories
    Replies: 45
    Last Post: 16-06-2018, 12:26 AM
  2. any advice?
    By Shahin in forum Photography and Video
    Replies: 13
    Last Post: 24-06-2017, 07:33 PM
  3. advice please
    By rs200nz in forum Firearms, Optics and Accessories
    Replies: 16
    Last Post: 12-06-2015, 11:12 PM
  4. Advice pls
    By Munsey in forum Photography and Video
    Replies: 16
    Last Post: 02-06-2015, 12:01 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!