any feedback on Pard 007 clip on

Printable View

15-11-2021, 08:46 AM
muzza2020

1 Attachment(s)

any feedback on Pard 007 clip on

Hi

just wondering if anyone has had hands on experience with the Pard 007 - thinking about using on a Tikka Creedmoor with Swarovski scope

https://pard.co.nz/product/007s-clip-on-scope-new/

Thanks in advance
m

Attachment 183568
15-11-2021, 09:19 AM
GWH

I know a few on here use them. They are good, but may not work well with your Swaro, the clip ons tend to work better with lower quality scope. Its to do with coatings on lenses i believe.
15-11-2021, 09:56 AM
Marty Henry

https://www.nzhuntingandshooting.co....6-101-a-75532/ fill your boots 16 pages of it packed with good advice and actual experiences
15-11-2021, 03:39 PM
55six

For less dollars you will be able to get the Sytong version with built in range finder next week.
15-11-2021, 08:28 PM
flock

Quote:

Originally Posted by GWH

I know a few on here use them. They are good, but may not work well with your Swaro, the clip ons tend to work better with lower quality scope. Its to do with coatings on lenses i believe.

Second that my, Pard 007 doesn't perform well on the Z5
15-11-2021, 08:30 PM
muzza2020

Quote:

Originally Posted by 55six

For less dollars you will be able to get the Sytong version with built in range finder next week.

can these be tried on scop?
15-11-2021, 08:30 PM
muzza2020

Quote:

Originally Posted by flock

Second that my, Pard 007 doesn't perform well on the Z5

thanks for that info
15-11-2021, 08:45 PM
andyanimal31

Very pleased with mine.

Sent from my SM-A025F using Tapatalk
15-11-2021, 08:51 PM
Tahr

Quote:

Originally Posted by andyanimal31

Very pleased with mine.

Sent from my SM-A025F using Tapatalk

Who's going to say to the Nightforce guy that's 'cos they work best through cheap glass? :) :)
15-11-2021, 09:41 PM
andyanimal31

Quote:

Originally Posted by Tahr

Who's going to say to the Nightforce guy that's 'cos they work best through cheap glass? :) :)

Because they are smart!
To be fair I don't really have any cheap scopes on rifles.
Life's to short for cheap scopes!

Sent from my SM-A025F using Tapatalk
16-11-2021, 07:11 AM
Marty Henry

Cheap glass isn't always bad, the main issue as I understand it is some of the fluoride coatings that improve light transmission, reduce chromatic aberration and give these scopes their edge in the last few minutes of light also diffuse or partly absorb infra red which is what these units rely on.
16-11-2021, 08:26 AM
zeropak

Quote:

Originally Posted by muzza2020

Hi

just wondering if anyone has had hands on experience with the Pard 007 - thinking about using on a Tikka Creedmoor with Swarovski scope

https://pard.co.nz/product/007s-clip-on-scope-new/

Thanks in advance
m

Attachment 183568

I have a Pard007 which I use on a Swarovski Z5 3.5/18. I did have some initial issues getting a decent image, I seem to have solved that now by mounting a Laser IR torch forward under the forearm of the rifle. Not sure why the internal IR on the Pard did not perform adequately. It could be because of the lens coatings on the Swaro but I don't think so. I also tried it on a Vortex scope mounted on the same rifle with the same marginal results. This issue could also have been because of glare from the barrel/suppressor. Bottom line is that it seems to be working well now, the takeaway from this I think is that Pard or Sytong you need to be prepared to have a bit of a play around until you get the desired result, they don't always seem to be plug and play.