Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak Alpine


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 23
Like Tree10Likes

Thread: AR-15 Suppressor - Adjustable Gas Block Required?

  1. #1
    Member
    Join Date
    Jan 2013
    Location
    Christchurch
    Posts
    155

    AR-15 Suppressor - Adjustable Gas Block Required?

    I've just purchased a new DPT suppressor for my Rock River Arms AR. It's an "Entry Tactical" model which is carbine length with 16" barrel, standard front sight gas block. I've never shot a suppressed AR before and I've heard they often have gas issues (overgassed) and need adjustable gas blocks to reduce the gas flow. Am I likely to need to invest in one or have people found it not necessary? I'll take it out this weekend and find out for myself I guess but thought i'd first see what everyone on here has experienced on similar suppressed AR's.

    Cheers
    CT

  2. #2
    Member JoshC's Avatar
    Join Date
    Apr 2012
    Location
    Southland/Otago
    Posts
    3,718
    Nope, fitted my DPT straight on and went shooting, no issues at all.
    C.T. likes this.
    I'm drawn to the mountains and the bush, it's where life is clear, where the world makes the most sense.

  3. #3
    Member stretch's Avatar
    Join Date
    Sep 2014
    Location
    Clarks Beach, (South of) Auckland
    Posts
    1,738
    I'd never noticed any "over-gassing" when using a suppressor UNTIL I fitted and tuned an adjustable gas block today. Obvious difference in felt recoil. Well worth doing.

    Sent from my SM-T800 using Tapatalk

  4. #4
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,257
    Gas blow back through the action is more of a problem when fitting a suppressor. A DPT should have enough capacity to reduce this a bit, better still if it's over barrel model. Check your rounds in the mag after firing a couple, if they are really dirty, this is blow back. I did fit a Syrac adjustable block to my RRA and it reduced felt action recoil.

  5. #5
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,833
    You may not NEED it depending on the kind of shooting you do. Using a heavier buffer makes a difference when shooting without an adjustable gas block. An adjustable block does more than just reduce gas in your face. You can tune your gun to get just enough gas to cycle well, which will cut felt recoil significantly, and increase the service life of your bolt. Standard gas block vs adjustable will make it feel like a different gun
    R93, Banana, stretch and 2 others like this.

  6. #6
    Member stretch's Avatar
    Join Date
    Sep 2014
    Location
    Clarks Beach, (South of) Auckland
    Posts
    1,738
    Quote Originally Posted by Beavis View Post
    You may not NEED it depending on the kind of shooting you do. Using a heavier buffer makes a difference when shooting without an adjustable gas block. An adjustable block does more than just reduce gas in your face. You can tune your gun to get just enough gas to cycle well, which will cut felt recoil significantly, and increase the service life of your bolt. Standard gas block vs adjustable will make it feel like a different gun
    I've sold maybe a dozen adjustable gas blocks on this forum, and only just got around to fitting one myself. Can't believe the difference. Should've done it sooner.

    Sent from my SM-T800 using Tapatalk

  7. #7
    Member
    Join Date
    Jan 2013
    Location
    Christchurch
    Posts
    155
    Thanks for the replies team. Any recommendations on the best brand/type to go for other than the Syriac Mathias used? I'll be using the suppressor all the time so don't think i'll need a fancy one with a switch for suppressed/non suppressed.

  8. #8
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,833
    Superlative Arms

  9. #9
    Member dogmatix's Avatar
    Join Date
    Dec 2011
    Location
    Northern Gaul (Pukekohe)
    Posts
    5,774
    IMO DPT cans are not good for gas back, even with an adjustable gas block.
    This is my experience on a number of ARs, different barrel lengths, calibres and with and without adjustable blocks.
    Gas busting the charging handle helps.

    I wouldn't buy another for use on a direct impingement AR.

    If you can, get the Superlative Arms bleed off block. It can bleed off or pinch the gas system to suit the user.
    Welcome to Sako club.

  10. #10
    Member
    Join Date
    Feb 2016
    Location
    NZ
    Posts
    297
    I went through the exercise recently and found that a heavier buffer and an adjustable gas block transformed my carbine. Before hand, it recoiled reasonably hard and there was a lot of gas coming up under my safety glasses making my eyes water. It is a lightweight carbine with 12.5" barrel and after 50 odd rounds it was becoming unpleasant to shoot with watering eyes and a yellow bruise forming from the plastic Armaworx stock. My suppressor is an ASE CQBS-BL which is a compact unit and as a consequence creates greater back pressure. I first moved to an H3 buffer which slowed things down about 10% but the best thing I changed was the gas block. A Dean Maisey adjustable gas block softened the recoil, eliminated the gas and allowed control of the brass ejection to land in a sweet little pile at 4:00 so I don't have to grovel around in the grass at the range. Don't get those horrible little cheapo gas blocks on TM as my one seized after 20-30 rounds because of the grub screw being too small. Dean's gas block has a massive adjustment screw which is indexed so you can easily alternate between different applications and will not ever seize.

  11. #11
    Member
    Join Date
    Jan 2016
    Location
    South of the bombays
    Posts
    174
    I run a Seekins adj gas block on my 16" spikes and it has never given me any issues.

  12. #12
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,444
    Ken at NZAR15 is your man if Stretch has run out

    Have a little read about why/how/sexytime: https://www.nzhuntingandshooting.co....ks-ar15-25570/
    C.T. likes this.
    Identify your target beyond all doubt

  13. #13
    Member JoshC's Avatar
    Join Date
    Apr 2012
    Location
    Southland/Otago
    Posts
    3,718
    Hmmm interesting. Might go by one now and see if it makes a difference
    I'm drawn to the mountains and the bush, it's where life is clear, where the world makes the most sense.

  14. #14
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    As @Beavis mentioned you are prolonging the life of your rifle and working parts. Why hammer them with over gassing?

    Rifle should be balanced when using an adjustable block, with or without a suppressor or a change of load anyway. 9/10 times if done properly it doesn't matter what buffer spring you run. Heavy buffer springs can be avoided with a good block as they can increase felt recoil and disrupt quick sight alignment.

    Restrict the gas flow by screwing the adjustment screw in until the rifle doesn't cycle. Wind out, half a turn until it the BCG locks back firing one shot from the mag at a time.

    Once you have achieved lock back wind her out another half turn confirm it cycles with a few rounds and lock the set screw. Rifle is now balanced for the particular ammunition you are using with or without a suppressor.

    I balance my rifle when ever I fit a suppressor or remove it. And especially if I ever change my load.
    Makes for a flatter shooting rifle that is not overworking the guts.
    My JP when properly balanced and using a break is like firing a 22 apart from the noise.






    Sent from my SM-G965F using Tapatalk
    Last edited by R93; 19-06-2018 at 10:56 AM.
    Mathias likes this.
    Do what ya want! Ya will anyway.

  15. #15
    Member
    Join Date
    May 2016
    Location
    Nz
    Posts
    1,310
    I'll be using mine for service rifle class which unfortunately means I can't use an adjustable gas block. The results you guys are describing sound quite beneficial!

 

 

Similar Threads

  1. DIY adjustable gas block
    By specweapon in forum Firearms, Optics and Accessories
    Replies: 10
    Last Post: 05-07-2014, 06:48 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!