Steven
One of these.
https://nzar15.com/store/index.php?i...roller=product
I like it very much and it looks good too.
Cheers
Pete
Printable View
Steven
One of these.
https://nzar15.com/store/index.php?i...roller=product
I like it very much and it looks good too.
Cheers
Pete
Here's an easy lubrication guidance for those new to the AR15
Attachment 31662Attachment 31663Attachment 31664Attachment 31665
Get yourself the dvd "Gas gun Basics" i think from JP Rifles. Excellent info on it
@P38 thought so, its on my shopping list, Im waiting on deltasector if they dont come through Im going to build an ar15.
Hi Guys looking for a good 20inch or 16inch barrel, I want an accurate barrel but I am not allowed a match grade and I need a A2 front post its for service rifle. Who makes the best non-SS barrels do you think?
@Herbmiester has got some nice Criterion AR15 barrels - these are button rifled, chrome lined moly steel, and shoot good
If it is only for service rifle I'd just get one of the cheap DPMS HBAR's off Brownells.
Brownells is a probable source, dont really mind spending a little more if its for a decent barrel.
Just about to order an adjustable gas block from brownells but could someone please tell me roughly how long that takes?
Sent from my iPhone using Tapatalk
If its <$100 I'd allow 2 weeks. Note however that the postage will add up. Looking at my recent bills buying under $100USd means the postage is a big % of the final bill. So I am going to go for just under $300US per order so its under $00NZ and be prepared to wait for the parts (in which case 4~6weeks).
There is one on TM dunno if it would suit you, its Gunworks selling it, so should be OK,
AR15 .750" low profile Gas Block | Trade Me
Ask them if they can drill it to make it adjustable?
Yeah I'm after an adjustable one that's the only problem. Can't find one anywhere here. They're about $65US on brownells
Sent from my iPhone using Tapatalk
Hmm thoughts on "slapping" a rifle length gas system (20inch barrel) upper onto a M4 ex-16inch carbine lower? So is it likely that the gentler gas impulse will cause issues like a short stroke? Would there be an "easy fix" like swapping out the buffer for a lighter one?
.
Make sure the feed ramp cuts in the receiver match the feed ramp cuts on the barrel extension.