Printable View
Hi, I’ve been reading a lot on here about people using tight twist barrels to stabilise heavier projectiles so got me thinking about my own rifle.
I’ve got a Tikka T3 in 1:8 twist so thought going to this Belmont ammo might be a good idea. Mostly use it to shoot goats and fallow deer out to about 150m, mostly under that for deer. Usually shoot 55 grain and it loves it. The Belmont stuff is 62 grain Hornady SP projectiles.
What you guys reckon?
Will the 62 give a noticeable bit more punch to go out to 200m?
a wise old man once siad "if its not broken dont try to fix it"............ but no harm in buying box of 20 and seeing what it does.
Onto my second tin of this its excellent. You trade off a little speed for better wind bucking and energy retention over that range. In my rifles its only fractionally less accurate than my best target load less expensive and i dont have to worry about policing my brass.
Thanks guys, I’ll give it a go, won’t go buying in bulk yet but it’s only 60c a round if ya buy 1000, take me ages to get thru that many tho!
Cant go wrong mate
Sent from my SM-G975F using Tapatalk
you can try the 77 grain belmont. I have the same tikka and that ammo shoots 1/2 inch at 200yards. but drops quite a bit more than the 62 grain.
The heavier pills are only another few clicks or inches holdover. Got nothing to lose really.
I have found the 62gr a lot more emphatic on goats and little difference in trajectory
Sent from my SM-N960F using Tapatalk
Excellent, cheers. Will get some 62s on way and have a go.