Hi I recently brought one and really like it but have found can be a bit hard to break open sometimes, is this normal? And anything that can be done to make it more smoother to open? Cheers
Sent from my iPhone using Tapatalk
Printable View
Hi I recently brought one and really like it but have found can be a bit hard to break open sometimes, is this normal? And anything that can be done to make it more smoother to open? Cheers
Sent from my iPhone using Tapatalk
Is it harder to open when loaded or fired compared to opening with an empty chamber
Na does it empty aswell sort of feels like it’s catching on something?
Sent from my iPhone using Tapatalk
Mine does the same thing - the lever/trigger guard is hard to open. It doesn't do it if I close the action with the lever pulled back.
I think @matto1234 might have had the same issue fixed by a local gunsmith?
Don’t have a problem with mine 308 16 inch, amazed how well they shoot.
I’ve given it a spray with crc and has freed up a bit , might need a visit to gunsmith aswell cheersQuote:
Originally Posted by Cigar
Sent from my iPhone using Tapatalk
Sit in front of the tv and open and shut it for half an hour while your watching Shortland st
Should smooth a few sliding surfaces as required
Cheers been doing that watching the harry interviewQuote:
Originally Posted by 7mmsaum
Sent from my iPhone using Tapatalk
As well as melt his eyes out and turn him into a gibbering idiotQuote:
Originally Posted by 7mmsaum
I had mine ceracoated and it was a botch job. Everything got coated, had to wet dry sand it off in a lot of places to get it to function. It bubbled up with rust underneath not long after
@matto1234Quote:
Originally Posted by matto1234
Damn. What outfit did the cerakote?
Wont say publicly, believe its changed hands since thenQuote:
Originally Posted by 308mate
easiest fix......sell it and buy a Sako :yaeh am not durnk:Quote:
Originally Posted by buzzman
Mine would bind up sometimes, had to send it back to the shop, pretty sure they just lapped it around the mating surfaces. Break it down and colour the marring surfaces with a sharpie, then break it open will show you where its binding up/rubbing
Geezus- I Durakoted my one twice -it's not that hard to mask the hinge areas off :)Quote:
Originally Posted by matto1234