I've been considering a 795 instead of the 10/22, I like the bedding system, barrel setup, aftermarket stock choices, and the LRBHO better than 10/22.
Printable View
I've been considering a 795 instead of the 10/22, I like the bedding system, barrel setup, aftermarket stock choices, and the LRBHO better than 10/22.
At the mo he is pretty keen on this.
https://www.volquartsen.com/products...arreled-action
But minus the break/compensator/loudener and a thread for suppressor instead.
Reloaders are the NZ agents?
Need to sort out a left or ambi stock. (if its ambi I can make sure it doesnt seize up;):D)
perhaps the 5000 stock
no 5 on the rolling pics
https://www.volquartsen.com/products...arreled-action
What's the stock 795 trigger like? Any issue with running subs?
Ie putting your hand in front of the muzzle of a loaded rifle
Pretty horrible American anti lawsuit job but easily fixed. I just used a 3.5" floppy shutter spring. If you want then you can put a grub screw in the trigger nose or add a lump of kneedit and file it off. Should cost about a $1 to fix. You can polish a few of the surfaces if you want but I didn't bother. Mine is fine with subs.
One thing to remember with an accurate rifle is 1 shot 1 kill so the 15 shot tube can last a while. Not like the 10x 22 shots required by something with those numbers in it. One of our group finally gave up on his Ruger and hasn't looked back, ... he did try holding out.
You just need the right suppressor
Attachment 14545
a tube mag is workable but given the choice between tube or detachable when buying a new gun I wouldn't have to stop to consider the issue