Printable View
Mates young fulla borrowed his dads rifle
Young army officer fairly hard on anything he touches...
Typical !!
VX3 4.5-14 X 40
Comes back to find top turrent will only rotate from kinda 12 o clock to 2 o clock then same distance in reverse then stops like its
hit a brick wall IE no adjustment in any direction..
This is for elevation. The lefty righty adjuster feels as per normal
Any one have any ideas on this at all ?? :thumbsup:
Well not with the scope but I do with the falla that borrowed it:ninj::fighting::fire:
Apart from that not much help but he broke it he owns it :thumbsup:
Mate,Quote:
Originally Posted by Happy
ZL/ZL 2 turret? 1st point of call (if you haven’t done so already), remove the turret and have a look. Try rotating the turret with a flat head, see if rotated any differently. Otherwise, it’s likely a send away job.
Sent from my iPhone using Tapatalk
Yep tried that ...Thats what I was thinking ..Quote:
Originally Posted by Hunter_killer
Does it have the zero stop ball bearing in it?
GRUNTs eh? No surprises there.
Nah, I believe they work off the actual ZL turret. So by removing the turret and rotating the internal dial... should remove any fault in regards to ZL itself. Could be wrong.Quote:
Originally Posted by Gibo
Sent from my iPhone using Tapatalk
just be thankful its a leupold, their backup service is amazing
Right you are, didn't read the bit where he took the turret offQuote:
Originally Posted by Hunter_killer
This one is the one with Top turrent free to see for dialing elevation and the side one you remove the cap before you can adjust it
Its like someone has forced past the end of adjustment
Sounds bad mate. Try a hammer
Yup, I have two HD5’s that have the ZL2 dial on top (enclosed adjustable windage turret)Quote:
Originally Posted by Happy
Could you get a pick for us mate? Or even a small video?
Just to check that we are on the same track.
Other options;
Internal adjustment might have jumped out. But unlikely. You might be able to check it by lining it up with a horizontal plane and dialing to see if it (the horizontal line in the scope) moves. Doesn’t really help though, if it’s internal, there is no real solution but to send it away.
Without taking mine apart, you may be able to remove the turret in its entirety and check the internals, something may have come loose due to recoil, ie a C clip or grub screw? But again, if you can get it away to a Leupold specialist at cost to the user (postage etc), that would be your best bet.
Sent from my iPhone using Tapatalk
I cant see photos on my PC today.
Is it the same turret as this Andy?
https://www.nzhuntingandshooting.co....rp-stop-30154/
I Have refitted the cap and tightened the three allen keys. Reckon they were a little loose.Quote:
Originally Posted by Hunter_killer
Now I can say it definitely has 3 clicks in either direction then it stops and you ll break something before it will move any more.
Does it look like you can unwind the actual turret attached to the body of the scope? (Under the CDS) from memory, it’s a pretty sealed unit. My guess is that if it’s going the same amount in each direction that it is a loose component inside the turret body, either from “recoil” or likely a drop of sorts...
I think its fucked. Send to Oregon and get a new one back.
I can bring my VX cds down Friday to compare.
You don't think young sir has retightened the rings for dad - thinking I'll sort it out for him? buckling the tube through torque???
But my gut I think is a fairly hefty bang has stuffed the roller gearing for the errector tube or got them out of synch - Send away me thinks... any external dings or rub marks in the mid section that would indicate it took a wee hit?or twist?
CD