Thread: Bits to fit a Wheeler F.A.T. wrench

I use std 6mm hex bits with an extension on my FAT.

For those reccomending loctites. 222 is purple, and is a low strength adhesive. Its good for 22 - 223 low recoil rifles, on scope screws. loctite 243 is blue, and good for higher impact.
Beware though. 222 is good for screws you want to fit and remove later. 243 will be a one-use only adhesive but if you don't want to strip the threads, a hair dryer for a few mins on the screws will break the bonds but not reccomended if its possible that the heat will directly affect the scope. In this case I apply heat with the tip of a soldering iron.

I use anti-seize on my suppressor threads, my action screws, those screws basically that need to be removed for maintenance.