Thread: Bits to fit a Wheeler F.A.T. wrench

Originally Posted by Jacobite

I'd heard you shouldn't use a anti-lock paste/grease that contains copper as it could lead to corrosion of the threads? Is that correct or have I been put wrong?

I work in Marine manufacturing industry. copper anti-seize is not really an issue unless you are going to be near the sea. It can cause galvanic corrosion if using a cheap copper grease with potential for some aluminum in the grease, and a blued action. But a good quality copper grease should have some molybdenum in it, maybe even some teflon. I use Rocol (as I get it from work) and it contains Moly and graphite. No Aluminium.