Thread: Blaser Q's & A's

Now that rubbish is out of the way a helpful knowledgeable answer may appear as I d seriously like to send two barrels one suppressor away to get modded

Bwah ha ha !!!

Conventional thought would call optimum length whatever length yielded the highest velocity.

What is your personal description of optimum length ?

have we measured the barrels to see how different the dia's are???

Originally Posted by longrange308

have we measured the barrels to see how different the dia's are???

Same profile all the way Cheers

Long enough to retain good accuracy related to the caliber but as short as possible as well to make it nice to carry with the suppressor fitted.

Why does this weird idea persist that barrel length has something to do with accuracy?

Originally Posted by Sidney

Why does this weird idea persist that barrel length has something to do with accuracy?

I m only asking in case there's a sweet spot and someone says hey I Ve been there and 20 inches is a sweet spot for both or 19 or whatever or there isn't a sweet spot because I'm not sure !

Cheers

Originally Posted by Happy

I m only asking in case there's a sweet spot and someone says hey I Ve been there and 20 inches is a sweet spot for both or 19 or whatever or there isn't a sweet spot because I'm not sure !

Cheers

Just cut it so the muffeler clears the stock and be done with it.

The way I see it you have a few choices....
factory length
shortened so factory length with can on.
as short as possible without interfering with stock.
As short as you can legally run and bugger the stock if it is in the way.

VC your a fucken genius! It won't make any difference to Happys shooting! Gotta say I could become gay and own a BLASER after playing with Happys

Originally Posted by Maca49

VC your a fucken genius! It won't make any difference to Happys shooting! Gotta say I could become gay and own a BLASER after playing with Happys

If there are 2 ways you could read the above then I read it the WRONG way

My 7-08 is cut to 18.5" (or was it 19?). Standard profile barrels in M cal are same/same IIRC, just different hole through the guts. Still accurate as hell, lost about 150fps from factory. Way better shorter.

Originally Posted by kiwijames

My 7-08 is cut to 18.5" (or was it 19?). Standard profile barrels in M cal are same/same IIRC, just different hole through the guts. Still accurate as hell, lost about 150fps from factory. Way better shorter.

Thanks that's the answer.. If it was a Tikka it d be 12" and who cares but two at once I need to do the right thing if possible.

Originally Posted by Happy

Thanks that's the answer.. If it was a Tikka it d be 12" and who cares but two at once I need to do the right thing if possible.

The right thing to do considering the blaser is so short anyhow is probably to leave factory length.


Sent from my iPhone using Tapatalk