Pretty much on 3k. Cheaper to get full gun and sell one you have now.
Sent from my SM-G900F using Tapatalk
Printable View
A bedding block cant be that hard to make and a stock that has been run over or dropped off a bluff must be around somewhere, get one and give it to someone with a cnc mill, probably spit out 30 an hour.
Haha! The lab is compulsory. Bought a 243 kimber the other day - now that thing is too light. Nice to carry all day but I probably couldn't hit anything with it in a standing shot. Needs a suppressor to make it a bit more front heavy.
With after market saddle mount, lighter scopes and carbon wrapped barrel it lost 1 1/2 lbs.
I also lost some weight in the stock.
(Original offroad)
I had exactly the same set up as you with fluted barrels and march.
My .223 set up is heavier now than my .260
Sent from my SM-G900F using Tapatalk
Mauser makes the M03 which is a switch barrel turnbolt that uses the blaser barreel switch system.
Bout as close as you will get to blaser making a turnbolt I think
Attachment 29922
I highly doubt the Mauser will use a Blaser barrel system. The radial lock up in the barrel would not work with a turn bolt. Event the Blaser scope mount system would not work.
edit: The M08 barrel has similar attachment studs and interchangeable bolt head like the Blaser but the two would not be interchangable.
Does any one know what those christian blaser stocks weigh? Not sure what the weight saving woukd be over a standard r93/R8 stock.