I saw that one. Even though I'm shit at DIY, I'd have a fair idea that I was drilling through the barrel! :D
Printable View
Sort of bubba-ish.
https://www.trademe.co.nz/a/marketpl...3?bof=kottvzrI
He states "Carbon barrel sleeve and matching carbon fibre silencer, making this backyard friendly." but it is CO2 so unless he has magically doubled the rate at which CO2 decompresses then he will be about 750 fps with no spring slap so the silencer will work as effectively as an unplugged set of headphones...(Looks like PPE but does nothing....) It would be like putting a muffler on an electric car......
However, CO2 shooters are brilliant for back yard plinking...Like the good ole QB79...
Industry QB79 Accurate like I would never have believed....a cheap arse 6x32 scope and a tendency to hit a 10c piece at 25 m (best group was about the same size at 50m but drop was a bastard....) I get about 600fps going by trajectory...brilliant for plinking but I need to source a new seal for where the bottle screws in ...so a visit to paint ball supplier beckons...
Picked this up the other day. Someone wanted to fit a scope to it so they welded some dovetails on. Rifle has USSR stamped on it but no name.Anyone know what make/model it might be?https://uploads.tapatalk-cdn.com/202...b7e874d03f.jpghttps://uploads.tapatalk-cdn.com/202...4c38caabe7.jpg
Sent from my SM-G525F using Tapatalk
Got a photo of the butt?
There ya go @Rocco . No markings that I can see. Here's the bolt if that helps?https://uploads.tapatalk-cdn.com/202...4c5db47424.jpghttps://uploads.tapatalk-cdn.com/202...daa50900a7.jpghttps://uploads.tapatalk-cdn.com/202...82e7fb5ebb.jpg
Sent from my SM-G525F using Tapatalk
TOZ16
Had one back when I was 15 ( well I paid for it, and Dad put it on his licence )
They had an unusual smell, always thought it was the polish on the wood.
Good times
Well he has completely wrecked/ruined the stock.
It would be worth 200 but would need another stock. duh.
Not a heavy rifle to start with. Wouldnt have made it bugger all lighter with the wood he removed and utterly ruined its balance
Check out this beauty…
https://www.trademe.co.nz/a/marketpl...ing/3953581310
That'll be the cosmoline
Attachment 214815
https://www.trademe.co.nz/a/marketpl...ing/3970139840
Ugly ugly p14
@paremata And that's a compliment for it!
The worst part is how much they have chopped off the back to get the dot sight mounted.
If they milled of too much it wrecks it a bit
Yeah nah, a lot of those vintage P14s have naff barrels.
If he has wrecked the action fitting the red dot it's only good for the lower metal, stock and bolt
Think ive seen these on before but good got a giggle
Attachment 215863
Attachment 215864
Trigger warning, if you like marlin lever actions don't click https://www.trademe.co.nz/a/marketpl...ing/3983260318