Thread: Which Carbon Bipod?

Originally Posted by 25/08IMP

So are they nice and ridged in the joints
ie they don't flop around

Sent from my CPH2145 using Tapatalk

Hi 25/08IMP, Matt here from MTNGear. Correct the joints are torqued to specific tightness's to have a firm rotation/pan/tilt to give a stable platform to shoot off and to make sure the rifle does flop over etc. Often people thing they are too tight as the parts cannot easily be moved by hand but ones on the rifle it works well. They are not adjustable i.e. able to be locked but they are firm and should be sufficient. Once you get on target your rifle should stay in that position without needing to be held in place. Ie there are no springs in these joints as my old harris tilt bipod had which you had to fight at greater angles. Cheers, Matt