Crowns and BC

2 well discussed topics!

This article is some serious food for thought (read the whole thing) The crown stuff seriously challenges "what we know" and the BC bit is looking at the subject in a way I have not considered before at all. The Over-Rated Crown

Reminds me of NK's 6mm br Blaser which had a blatantly shit crown with a huge corona of soot all in the vertical and apparently still shot like a laser beam. Also reminds me of some sad cunt moaning and crying like a bitch about having to recrown his .270 with a leatherman while out thar hunting - still seemed to shoot alright!!

Pretty interesting

The ol' leatherman crown
Didn't seem to make any difference other than pride

good read.

I have seen several rifles with oil ring bulges right at the muzzle and seemingly perfect crowns shoot very accuratly , and others turn into spray guns , same with giant pits in the bore , some shoot well some dont , with that in mind I'd like to see that very interesting experiment repeted with different calibers and different projectile types and weights and velocities and even barrel weight before any conclusions are finally drawn ,

The WORST bore I have ever seen .. 6" of heavy pitting back about 4" from the muzzle shot sub 0.1" groups at 115yds

Bloody interesting article. I knew BC varied with velocity but didnt realise by how much. I think if you have a rifle shooting under an inch consistently with low ES under 20fps, I think it would be better to never think of that article again:D
I have in the past known a few recrowned barrels, where accuracy markedly improved after doing so.

I'm happy if I can consistantly shoot minute of deer after huffing and puffing and hauling my fat arse up the hills ..... the queste for sub 1" MOA accuracy for hunting rifles is unnecessary, leave that to the paper punchers.

I know every rifle I own can shoot extreamly accurately off the bench, But it's a bloody awkward heavy noisy thing to carry through the bush and the deer tend to fu*k off while I'm pissing around setting it up for the shot. ;)

That said I do like to look after my crowns.

Cheers
Pete

Wow now that was am interesting read :)
Cheers for the post


Sent from my iPhone using Tapatalk

Not sure - they are using pretty good gear by the sounds of things, probably pretty accurate.

It goes a long way to explaining why results at the range dont match "those damn ballistic calculators", i.e one ballistics program works for one guy but not another = its how closely that program's algorithm or fudge factor fits your "claimed projectile BC / chamber / bore / charge system". We should all probably be altering our stated BC's for each pill with measured information from the range to correct them for this deformation / yaw effect (or just shooting shit...). It certainly explains for me why exbal works good for my sprout / not so good for my abolt, I was blaming my scope clicks UNTILL i swapped scopes over and had the same shit happening...

This crown is well worn out and suffered all sorts of damage.
Seems to shoot alright. :D

Attachment 7398

Sent from my GT-S5360T using Tapatalk 2

Quote:

---

Originally Posted by veitnamcam

This crown is well worn out and suffered all sorts of damage.
Seems to shoot alright. :D

Attachment 7398

Sent from my GT-S5360T using Tapatalk 2

---

Haha yep that crown looks farked :)
Least you old Jedis found a deer this time:)

Quote:

---

Originally Posted by BRADS

Haha yep that crown looks farked :)
Least you old Jedis found a deer this time:)

---

Almost worth getting up at 1.45 am.......:)

Quote:

---

Originally Posted by veitnamcam

This crown is well worn out and suffered all sorts of damage.
Seems to shoot alright. :D

Attachment 7398

Sent from my GT-S5360T using Tapatalk 2

---

My crowns not much better VC .... but it still shoots good enough to fill the freezer. :)

Yes BC is not constant but I certainly throught that the BC of a pill leaving the barrel of a rifle should be "a given number". He is getting at the fact that 2 identical pills fired from 2 rifles side by side will have different apparent BC's due to their degree of yaw induced by barrel / chamber variations. I.e one is going straight and one is leaving the barrel slightly sideways or the pill has been extruded into a slightly oblique and less slippery shape.

yes

Quote:

---

Originally Posted by veitnamcam

This crown is well worn out and suffered all sorts of damage.
Seems to shoot alright. :D

Attachment 7398

Sent from my GT-S5360T using Tapatalk 2

---

GOLD!! :D
Deff worn out :)

Quote:

---

Originally Posted by Spanners

GOLD!! :D
Deff worn out :)

---

:D:D:D
Not worn out ..... more like Custom Made Solar Panels for recharging the batteries ;)

Yet I have a rifle that went off the boil at maybe 1000 rounds, smith recrowned it and good again. I'd been slack with taking the can off and cleaning......

Quote:

---

Originally Posted by veitnamcam

This crown is well worn out and suffered all sorts of damage.
Seems to shoot alright. :D

Attachment 7398

Sent from my GT-S5360T using Tapatalk 2

---

Hey VC, you do know that, if you draw 'little rabbits' on your head that from a distance they look like hares'?...........

Ha ha its not my crown, tho mine isn't that much better :thumbdown:

Sent from my GT-S5360T using Tapatalk 2