Post of the week[emoji481]
Sent from my iPhone using Tapatalk
Printable View
I want to buy one rifle and be happy with it rather than buying one and deciding I don't like it and having to getting another.
I read that some 85s had a problem ejecting, is that still a problem or is it sorted now?
Get yourself a rifle, learn to shoot it well, learn about shot placement, projectile choice, and what works and what doesnt, every calibre has its good points and its bad points and learning the limitations of your setup will do you a thousand times more good than buying all sorts of stuff because "oh i didnt like that it did this, or it did that"
A great example of this is the 270 haters here that hate them because they cant shoot or dont understand shot placement and ballistics and need to buy big cannons that could take down a Elephant you hit it in the tail to compensate for their shortcomings :p
If people use a quality round with a well constructed bullet then the .270 will be as effective a caliber as any other on the hill.
Poorly constructed and cheap (usually 130 grain) bullets that suffer premature blow up and jacket separation are where the problem is with the .270...not the caliber!
You'll be happy to know I'm under strict instructions from the old man not to anywhere near a .270!
Haha wota legand!
No one has answered this,
sum of the long action, rifles the empty brass can hit the scope, and fall back into the action, This only seams to be a problem when you are soft/ slow pulling the action back.
I have two long action sako 85's and had a 85 finlight 260, not a problem on the short action, I have encounted it a couple times, only at the range when trying to slowly retract action, to stop brass landing on the ground.
I have close to a thousand rounds threw both my sako 85 long actions, 2506, 3006 and have never had a problem in the field, or in any shooting position other that sitting at a bench,
They a good rifle, and hold there value well,
My finnlight is a short action (SM short mag action) and it has the same problem, if i pull back the bolt very slowly the brass doesnt quite jump out of the action, normal use its not a problem its just the ejector pulls on the case to angle it a bit more upwards than outwards, in a hunting situation (prone shot) I actually kind of like it, shot fired, then just slowly open the action and the case pops off the bolt face and is sitting there for me to collect rather than fishing around in the grass for it.
I wouldn't, but can understand your concern for a first rifle, there is tens of thousands of 85 model Sakos, in current use, around the world, most like them, if your worried, about the scope and brass, you can flip the scope, so windage adjustment is on top and side on the right, looks a bit goofie thought.
Model 70 win, and the higher end rem M700 ie (BDL, or CDL) are very good options, for working rifles, Lots like there tikka's, I aren't a Fan, have had a dud,
I would much rater a M70 as I like the featherweight stock, steel, no plastic, and a effen big claw extractor.
Obviously too old to know that Datsuns are cool now!
I recall the old saying when it was `raining Datsun cogs ` ;)
Bet you Im just about half ur age.
Dude, grab a .223 and get some of the OSA 55gr game king loads.... you'll be able to use that a whole lot with low cost and learn good habits.
Spend a bit on your scope and learn to read the wind.... turkeys and rabbits are good targets to start with especially at range as you'll need to get it right past 200.
Howa, Tikka and CZ would be my choice in .223
Dude, grab a .223 and get some of the OSA 55gr game king loads.... you'll be able to use that a whole lot with low cost and learn good habits.
Spend a bit on your scope and learn to read the wind.... turkeys and rabbits are good targets to start with especially at range as you'll need to get it right past 200.
Howa, Tikka and CZ would be my choice in .223
The beauty of starting a thread with this title is the everybody feels qualified to give advice ! :):pacman::pacman: