Thanks @Guypie :thumbsup:
Some dimensions would be good too, although not necessary as I think I an work most of them out
Cheers
Pete
Printable View
Thanks @Guypie :thumbsup:
Some dimensions would be good too, although not necessary as I think I an work most of them out
Cheers
Pete
@P38
Hey Pete, have a complete rifle here you can borrow to copy the parts if you want. Will be in town tomorrow and Friday can drop it off for you @P38 .
@Guypie
Awesome mate :thumbsup:
That will help heaps
Cheers
Pete
@boarfreak
Thanks for the offer.
Friday would work for me.
Cheers
Pete
I have acquired one of the Gecado .22s for my boy to use and it is missing its extractor as they seem to.
Does anyone have one they would lend for a copy to be made, or have a spare to sell?
Failing that does anyone want a parts gun? Rifle is in good shape apart from a bit of rat chewing on the fore end of the stock
I have purchased another .22 for him so this is surplus if any use to someone
I have a 1927(I think) GECO single shot .22 with an extractor like that. The foresight has been snapped off but the extractor is still there. It looks exactly like the images posted here. Cocking piece is home made as some !!*##! Pinched half of in back in the 80’s. Guess I could offer it to someone to make one out of two if parts are compatible. The rifle is extremely accurate, but slow to load, as I found when I whacked a massive boar with it when out bunny hunting years ago.
Mine is the same as is in post#11
Not aluminium trigger, bolt handle is straight not bent
mineAttachment 89111
Im sure you know this but don’t try and fire it without one as the extractor makes up the bottom half of the rim recess in the chamber and without the cartridge is not fully supported in the chamber and will blow out I found this out the hard way when I first started shooting open it up One cheap and didn’t realise it was missing parts Blew a lot of stuff back in my face Was very lucky