Remington did a few different ones around that time I saw an ADL in Taihape that had a stock unlike any I had ever seen or seen again- still had no floorplate but was a delux stock for sure
Remington did a few different ones around that time I saw an ADL in Taihape that had a stock unlike any I had ever seen or seen again- still had no floorplate but was a delux stock for sure
@Mathias,not a Rem 7, but how bout a Husky 1600 Mannlicher Carbine .30-06.As new
Not a new one but my model 7 in 308 stainless but cerakoted with a swaro on top. 150 Ballistic tips at 2750 is dynamite on anything.
![]()
Yip.in the typical Euro Mannlicher configuration.This ones fired only a handful of rounds if you are interested
Yes, years ago I passed on an option of a M21 7x57 with 20in barrel because back then I thought it was too short. This was before I came to my senses and went hunting for a M22.
Once when I was too poor to be poking around gun shops, I was in Ballangers old shop, there was a very tidy Steyr Mannlicher model M full wood in 7x57, had to shut my eyes and slink off. It's out there somewhere.
Sent from my SM-S906E using Tapatalk
My barreled action, chassis off the forum, if you know you know. Samsung mag until a real one arrives from the Coast. Heavy girl 5.5 kg mt
2nd best caliber
Real guns start with the number 3 or bigger and make two holes, one in and one out
Got this back today. The infamous "oops I drilled a hole in the chamber" rifle. Now with 18.5" 8 twist truflite chambered in 6 creedmoor and a Zeiss Conquest on it. Had it profiled to match factory profile and has alloy bottom metal. Hopefully get out and shoot it some stage next few days.
![]()
Flappy Disc Customs Bespoke Hunting Rifles
Because I can’t get excited about black rifles I had caveman hydro dip my BRX1. Also had barrel cut to 17”
Got the rig back after getting the stock mag fitted with a new alloy guard. I had an accurate mag setup previously as I thought I’d need the extra length for custom loads but the 130eldm were shooting really well.
Tried the Deer Season 125 and holy hecka they are crazy accurate in this rig.
Mitch did the refit and had GunWorks flute the bolt.
Popped the scope back on after all the work and it hit in the same POI so no wasting time or ammo.
Absolute result!!
![]()
@Ryan_Songhurst ...A quick sand with 400 grit (or there abouts) and a spray with matt clearcoat...that stock will look like a bought one...and be less slippery in the wet. I turn the air pretty much off and texture the clearcoat with heavy drops at the end of painting...even better grip levels.
https://www.finlaysltd.co.nz/product-page/clear
Last edited by Fisherman; 06-09-2025 at 12:49 PM.
Bookmarks