308
Printable View
308
Howa Elevate Carbon 6.5CM with S&B 4-16 - shoots great nice and light!
Attachment 274031
What reticle did you go for? Shame 4W isn't on the list for that size....Quote:
Originally Posted by Ryan_Songhurst
BRWQuote:
Originally Posted by Mathias
Well just like that the superlight was posted here one minute and the next minute I killed it.... stand by for version 2.0
Killed it....??
Another wee carry on ,7mm08 R93
No light ,but neither am I .
Here's an old flame in 308win , still going strong .
Yeap. Killed it. But don't worry version 2.0 is currently getting a parts transferQuote:
Originally Posted by charliehorse
Attachment 274066Attachment 274066
For those of us that luv sommit different,
Me 338/6.5x55/6.5CM/308win.
Hi, how many Moa or mills does that scope have ? I suppose it is only just one revolution? How far you reckon you can shoot with it just by adjusting the turret?( no using the reticle)Quote:
Originally Posted by MP270
It has bugger all adjustment, only 3 mil but that’s far enough to get me out to 500yds with a 100yd zero, that’s far enough for me.
It does have mil dot reticle which gives another Mil if I hold over.
Certainly no flies on that rig😂Quote:
Originally Posted by DTA user
And version 2.0 is born. This one still 16" might keep it like that for a while see how it goes. Now just need to decide what the rebarrel the other one in since the chamber in it curently has a hole in it.....? Something that will fit and feed
from the mag.
Attachment 274084
How you kill it? Or have I missed something churQuote:
Originally Posted by Ryan_Songhurst
Sent from my iPhone using Tapatalk
Let's just say my gunsmithing career never really took off..Quote:
Originally Posted by buzzmann
Cryptic bugger I’m trying to put the picture together and I see a drill press re other action you always liked the 22-250 didn’t you? Fast twist 80 grain eldm 18ish” barrel could be neat for around the farmQuote:
Originally Posted by Ryan_Songhurst
You're onto it.... For some reason when I took the 1" talleys off to put the 30mm ones on the very front screw just snapped off while I was undoing it. Thought I would drill it out so set it up in the press and put a wee bit of tape around the drill bit so I knew how far to drill. Everything was working excellent when it went pop! and broke right through the chamber. Bloody tape had slid up the drill bit and I didnt notice so I had drilled a hole right down through the barrel into the chamber. Lucky the wife was in a good mood and I did a particularly good puppy dog face with my broken rifle in my hand so I shot into town and bought another Superlight they had on the shelf at our local sportshop. Will get the original one rebarelled just not sure what, something that stands apart from the 308 (which is a bit of an ask as they just do everything..) and will feed from the mag. A 243 or 6 creed superlight would be cool. I have plenty of components for one.Quote:
Originally Posted by Kelton
RS, Can you could fill the hole with a silver solder, push the chamber in a turn and a a half so the hole in barrel doesn't line up with the ring screw hole?
@Ryan_Songhurst 6mm Creedmoor!
Sent from my iPad using Tapatalk
Many nice rifles, seems to be quite a few carbon stocks we don't see here.
My Blaser R8 killstick is finished. Not light, but lighter.
Attachment 274147
Attachment 274148
Nice.Quote:
Originally Posted by Norway
10.5lb. Still only half the weight of a Bren Gun.
Mauser 66? You don't see a lot of them aroundQuote:
Originally Posted by DTA user
Bit of an oddball setup, rem660 in 6mm creedmoor, was a 284 win when I got it but being shorter mag length than a mod 7 it wasn't the best. Trigger and action feel really good and weight isn't too bad with the reasonably heavy barrel. Hopefully improve the groups with some reloads.Attachment 274329Attachment 274330Attachment 274331
Yeah, but I'm after deer, not germans or russiansQuote:
Originally Posted by Tahr
Can you do a custom chamber on one of my rifles :)Quote:
Originally Posted by Ryan_Songhurst
Well not yet anyway! I would expect their life expectancy to significantly diminish if it ever came to pass that you were to hunt them.Quote:
Originally Posted by Norway
My Tikka 300wsm about where i want it now.
20” barrel
Precision Platforms stock painted by Murfs Precision
Barrel chop, bolt flute done and put together by Rob at HG Precision.
Couldn't be happier.
Attachment 274627
Attachment 274628
My xbolt 300wsm bog standard can do better without spending all that lollyQuote:
Originally Posted by H.M
So?Quote:
Originally Posted by SmokeyJason
The man is happy
Why you gotta piss in his pocket?
You own a X bolt your opinion is voidQuote:
Originally Posted by SmokeyJason
Sent from my SM-S936B using Tapatalk
On very very rare occasions I think a “ Dislike “ button would be handy hereQuote:
Originally Posted by SmokeyJason
Cool, happy for you. For the first 3 shots from the rifle since it had the work done and new stock, factory ammo, i am stoked with it. :)Quote:
Originally Posted by SmokeyJason
Picked up this M7 in 260 with great plans for a custom build but thought I would see how she goes first. Chopped to 17", DPT, VX3 3.5x10. 100gr NBT with a full case of 2209 doing 3k. Very handy little rifle.
Attachment 274679
That stock looks like a shooterQuote:
Originally Posted by H.M
Nice set up,enjoy.Quote:
Originally Posted by H.M
hate to see all that money wasted, just for blingQuote:
Originally Posted by 308
It isn't your money. Pretty sure we could all start picking you apart if we were so inclined. And yes, you own an X-Bolt so just zip it, hate to see people waste their money on junk :PQuote:
Originally Posted by SmokeyJason
Life is short and there is no point taking money with you when it’s over.Quote:
Originally Posted by SmokeyJason
Each to there own we all spend money on hobbies that is not needed.Quote:
Originally Posted by SmokeyJason
But that's why we work, I've spent a ton of money on hunting stuff I won't say wasted not in front of my partner anyway.
Sent from my CPH2531 using Tapatalk
