Thread: Gunsmith recommendation for lever model 92s

Update. Checked clearance of cartridge guides as suggested. All seems good with no tight spots. Watching the cartridges closely as they cycle, the two lugs on the bottom of the ejector are catching on the bottom side of the primer as the bolt starts to go forward.

Originally Posted by Got-ya

Update. Checked clearance of cartridge guides as suggested. All seems good with no tight spots. Watching the cartridges closely as they cycle, the two lugs on the bottom of the ejector are catching on the bottom side of the primer as the bolt starts to go forward.

Get a flat needle file and put a small chamfer on the top edges of the ejector to stop it catching. It won't need much to solve it. You should be able to do it in place if you are careful.