Printable View
Huntsman Riflescopes, Laser Range Finders and Scope Mounts from Kilwell Sports
4 x 28 Rimfire Riflescope Compact. Can anyone tell me if these are ok
Just need something short and small as for Ruger 10/22 It will probably be used just with sub sonics
Need compact as it a take down model and I want it to fit in the bag
Open to suggestions up to 2 maybe $250 small scope if any one can help Really it's just got keep zero
And 4 power is enough for the 60 mtrs or so
For what you're prepared to spend on a scope, you'd be much better off with a quality optic like this:
Leupold M8-4x28mm Gloss Scope Only | Trade Me
Spend the balance of your scope money on a good set of rings.
Ray.
Thanks but it's too long10/22 Ruger the new take down model needs to have very short scope so the gun fits in the bagQuote:
Originally Posted by ishoot10s
I'd like to use a known quality but they are all to long Not scared of buying a good one just has to be short as
Flag the huntsman scope they are crap if you want short and compact then you may want to look at a red dot sight they are compact but you will need to buy batteries for it every now and then.
You might find an older model Loopy 1-4x20 Duplex gathering dust in a shop somewhere out there. Their newer versions of that scope are set up for turkeys and hogs.
Ray.
Nikon P-22 or P-223. Or a Bushnell TRS25.
Bushnell TRS25. +1
Sounds like a "flying pork" setup :OSMILEY:Quote:
Originally Posted by Happy
What about some better quality iron sights?
Sorted. Its just a toy.
Attachment 4016
Attachment 4017
Had a Redfield 3-9 40 so just purchased some Leupold QR Rings and we will see how it goes when the barrell returns from shortening and threading...
ha. thats not short
Be interesting to see if it holds zero being pulled to bits all the time.Quote:
Originally Posted by Bill999
yea, That would be interesting, one wouldn't think it will. keep this updated for that.
Righto shorthened the 10 22 TAKE DOWN Model barrel. Fitted suppressor. Used a Redfield Scope I had hanging round with Leupold QR Rings
and guess what you get on paper bulls easily repeatable at 50 mtrs . Take it to bits reassemble and its all over the place. 100 rounds later no solution .
200 Rounds later solution found.....
Sold the piece of crap for 200 hundy more than I paid/spent on it. Kept my scope. Bloke has a scope will fit it up and not take it to bits.
Verdict 10 22 Take down not even ok as a hall way special gun or F all else. Good thing I have my super quiet extensively modified one and my AK for the hallway ha ha .....
my suspicions have been confirmed:D
Roger that and I got another 8 hundy towards an AR ..HA HAQuote:
Originally Posted by Bill999
Suppose someone had to try it. Good thing either way as would have been fun if it retained accuracy and
good thing that it came and went quick as and no money damage done ...
its good when you satisfy your curiosity without it hurting your pocket.
you can allways just get a 22 conversion kit for your ar15. good way to get some cheep trigger time
talk to me nicely and I might even sell you mine for cheep
I think the only way a "cheap" take down is going to be sort of repeatable is with the scope mounted to the barrel.
my old gevarm had the same problem, barrel off poi moves, good enough to body shoot a rabbit but not what good is that?
thats.: pretty dam ugly, i got a scope on mine and it looks alot shorter than that:D
Read above not any more.It was trial only to see if 10 22 tke down model would keep zero when pulled to bits Answer no ..Quote:
Originally Posted by sakokid
