Printable View
Just mounted a Leopold Mk4 onto my 308 Brno ZKK601.
Looking sweet so far.
Bore sighted it and will zero it on the range tomorrow.
Question is what size Allen key is used to remove the grub screws on the elevation & windage turrets so I can zero the turrets once sighted in?
I tried a 1mm Allen Key that was too small and 2mm was too big and I don't have a 1.5mm Allen key .
Would this be metric or imperial?
Any help would be appreciated
Cheers
Pete
1/16" from memory
Thanks Gimp
Thought as much.... just couldn't locate my imperial set of Allen Keys today.
Cheers
Pete
I thought you got the allen key in the box std. second hand?
Leupold = US = Imperial, they like to be different
We have stuff at work which has some of the parts manufactured in the US and the rest in Canada. Uses a mixture of both, Frustrating to say the least, just like chippies who use a mixture of Square, philips and slot drive screws in the same job :(
Bound to be 2nd hand. Pete's too tight to buy new ;)Quote:
Originally Posted by Neckshot
HahahahaQuote:
Originally Posted by kiwijames
Your not wrong James!
No point in spending like a drunken sailor.
The seller wanted over $1k for it James ..... but it seems it shares the same serial number with several other Mk4's I was able to find on the net.
We renegotiated and I paid $150 including a set of mounts.
Only time will tell if I got a bargain or not.
I bore sighted it in the back yard old school style.
Took it to the range and fired one shot at 25m which showed I was about a 1" high.
Fired two shots at 100m and found I was about 5" high and 1" left...... several clicks later on both turrets and three more shots showed I was 2" high and good to go.
Six shots from bore sighting ...... not too bad even if I do say so myself.
Spent the rest of the afternoon sending slugs downrange from a tricked out AR15 ... .... It got bloody addictive and slightly competitive too after a few shots I can tell you.
Cheers
Pete
5/32 was the size .... once I found my imperial set.Quote:
Originally Posted by gimp
Cheers
Pete
actually yeah 1/16" is the remington trigger I don't even know what the fuck I was thinking