Hey, Anyone know what the size specs are for the set screws used on a VX3i CDS turret? There’s three of them which hold the turret on.
Cheers
Printable View
Hey, Anyone know what the size specs are for the set screws used on a VX3i CDS turret? There’s three of them which hold the turret on.
Cheers
Farken tiny and made of soft cheese :melt:
Yea they suck, stripped one today, I was real lucky to get it back out!!
There must be some better alternatives out there
Email Leupold and they can send you replacements.
Grub screw spec is 4-40, it is 1/4 (0.250) inch long.
You need a 3/64 hex allen key, in a pinch a 1.0mm metric allen key will work as well.
Awesome! Thanks heaps :)
Warning.... I have had two different sized grub screws on different VX3's, had the same with VX6 and VX5 also
Best be confirming with leupold then, thanks for the warning.
Both CDS @Ryan_Songhurst ?
This was from my CDS turret.
Yes
Theres two different sizes, some scopes have one size, some have the other, seemingly at random