Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT ZeroPak


User Tag List

+ Reply to Thread
Page 1 of 8 12345678 LastLast
Results 1 to 15 of 116
Like Tree56Likes

Thread: Lightest weight survival rifle

  1. #1
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,757

    Lightest weight survival rifle

    Goat culling in my teenage years was hard on .22 rimfires, usually the extractor failure preceded the accuracy decline but the result was always the same, into the offal hole it went.

    For some strange reason I had a run of lakefields and sterlings, and only one AR-7 which was on loan from my father, it has a plastic hollow stock that the action and barrel fitted into. Apparently it floated.

    I progressed to modified Remington Targetmasters to remove all the weight, and made alloy skeleton stocks for them. The single shot platforms were reliable, but had the Marlin "Papoose" been around that would have been the bizzo.

    I used my model 7's (saum's) for rafting and motorbike riding, they easily fit in a pack and are small.

    Has anyone here any pics or ideas for a lightest weight "survival" type rifle, .22 or otherwise ?

    http://www.henryrepeating.com/rifle-survival-ar7.cfm

    http://www.packrifle.com/packriflepictures.html

    http://www.youtube.com/watch?v=PM6Q7m-HFj4

    A good read here....
    http://bubbleheadgunnut.wordpress.co...-down-part-ii/











    Last edited by 7mmsaum; 04-07-2012 at 06:56 PM.

  2. #2
    Member
    Join Date
    Feb 2012
    Location
    Missouri, USA
    Posts
    351
    Im guessing a single shot option would be by far the lightest... Could you get a carbon fibre stock made for one of the many break open options out there. Flute the barrel and then mill any other un required metal out. Replace all screws with lighter options.. No recoil pad to speak of just harden up. What other mods are there?

  3. #3
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,812
    surprised to see such long and unfluted barrels. a chop and routing session will cut the weight of any of the above if you really cared that much

  4. #4
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,757
    Thats true Bill999, your comment shows just how far we have come in the last 5 years, I know I have personally learned a lot from the forum and had the same thoughts as yourself.

    I'd also say New Zealand is up there with the leaders in rifle innovations of late, there's some nice gear being made here now, and some outstanding rifles are in the development/testing stage as we speak.

    We just need powder technology to catch up.

    So, A big rifle is not needed for a 223, would this make for the lightest centrefire Survival rifle?

  5. #5
    By Popular Demand gimp's Avatar
    Join Date
    Dec 2011
    Location
    The Big H
    Posts
    8,886
    M6 scout is cool. Not the lightest, but cool. I want one. I will give someone money for one.

  6. #6
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,757
    That .410 would be handy gimp, slugs, buckshot and waterfowl/upland game loads----- hard to go hungry with that combo
    A big fast bullet beats a little fast bullet every time

  7. #7
    Member
    Join Date
    Dec 2011
    Location
    Hawera
    Posts
    1,096
    They look cool , but are very over priced , I brought a SS M6 Scout 22lr/410 model when they came in NZ , because , I HAD to have one , they looked so NEAT , it would have stayed in my safe if it was Harder , the SS barrel/chamber was so soft the rear of the chamber was getting penned badly by the hammer after only 10-2- rds , THATS not good enough in my book , and I flicked it on to some one else who had too have one .
    Also the iron sights on the M6 Scout are crap .

    I would NEVER buy a StainlessSteel one , my pick would be a 22hornet or 22lr in CM ( parkerised / blue steel ) .

    worth really 400 & NOT the 800 + they go for usually .

    A contender in 22lr or hornet would be a better option .

    Later Chris
    Last edited by ChrisF; 06-07-2012 at 01:52 PM.

  8. #8
    Member
    Join Date
    Dec 2011
    Location
    Hawera
    Posts
    1,096
    The AR-7 , was another case of cool looking over function , they where not very accurate or reliable , opps , the barrel was a thin barrel liner inside a aluminium outer ,

  9. #9
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,757
    I hear you there chris, my fathers ar 7 would occasionally fire two rounds with a touch of the trigger or just empty the mag in one continous rip.
    A big fast bullet beats a little fast bullet every time

  10. #10
    Member Clint Ruin's Avatar
    Join Date
    Jun 2012
    Location
    north
    Posts
    395
    Had an ar -7 in store the other week. Very light and drew a lot of attention due to its novelty/cool factor . .

    Its owner said it was a fun thing to use but not all that accurate.
    Last edited by Clint Ruin; 06-07-2012 at 08:11 PM. Reason: spelling!

  11. #11
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,812
    what purpose is it likely to serve? they all seem like the they are overly simplified for no particular reason. ergonomics seem poor.
    Id personally start with a 10-22 chop it to 16inches and bullpup it in a lightweight stock.
    would eventually end up as a glorified pistol that could be shoulder fired.
    Illegal, yes. compact and extreamly handy, also yes.

  12. #12
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,833
    I'd rather have a Kel Tec SU16 stowed away if I was flying over "hostile" territory. Light weight and doesn't take up much space, but has balls.
    Cordite likes this.

  13. #13
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,757
    Quote Originally Posted by Bill999 View Post
    what purpose is it likely to serve? they all seem like the they are overly simplified for no particular reason. ergonomics seem poor.
    Id personally start with a 10-22 chop it to 16inches and bullpup it in a lightweight stock.
    would eventually end up as a glorified pistol that could be shoulder fired.
    Illegal, yes. compact and extreamly handy, also yes.
    Bill999, its going to sit in my pack as I fish the mid/upper Hawkes Bay and lower Wairarapa Rivers. Very handy to have.

    ATM i use a model 7 and am interested in a lighter/less bulky alternative, -and have resisted using a 454 Cassall

  14. #14
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,812
    what is the legality of a rimfire up there?. If only pistols were legal to hunt with. Itd save alot of pussyfooting around.

  15. #15
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,757
    Bill, I doubt a rimfire is allowed on doc land without a permit.
    Wirehunt likes this.
    A big fast bullet beats a little fast bullet every time

 

 

Similar Threads

  1. The Tale of a Rifle
    By gimp in forum Firearms, Optics and Accessories
    Replies: 18
    Last Post: 23-08-2023, 10:23 PM
  2. L.R Rifle
    By HUNTY in forum Firearms, Optics and Accessories
    Replies: 25
    Last Post: 24-06-2012, 07:36 PM
  3. Just bought a rifle
    By veitnamcam in forum Firearms, Optics and Accessories
    Replies: 10
    Last Post: 18-03-2012, 12:13 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!