Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator ZeroPak


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 23
Like Tree30Likes

Thread: Low recoil Factory 308 Ammo

  1. #1
    Member Ground Control's Avatar
    Join Date
    Oct 2012
    Location
    Australia / Marlborough Sounds
    Posts
    1,262

    Low recoil Factory 308 Ammo

    I’ve got a mate who recently bought a 308 Howa for his son and he’s struggling with the recoil using Federal 150gn Factory ammo .
    Is there a lower power Factory load that anyone can recommend for Goats / Pigs etc ?
    I haven’t played with the 308 for years so I’m not up with the play , before you suggest hand loading / muzzle brakes etc it isn’t an option, they just want to use Factory ammo with a bare rifle .
    These guys are farmers not enthusiasts / Hunters , this rifle is a tool not a toy to eliminate feral animals on their property.
    Any suggestions
    FALL IN LOVE WITH THE NUMBERS , NOT THE IDEA

  2. #2
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    4,850
    Try some 130gr, it should have a bit less recoil.
    40mm and sore head stoat like this.

  3. #3
    Member 40mm's Avatar
    Join Date
    May 2017
    Location
    North Auckland
    Posts
    5,876
    Still, a suppressor/brake would be good for their ears and the shoulder.
    dannyb and Ftx325 like this.
    Use enough gun

  4. #4
    Member
    Join Date
    Jul 2013
    Location
    Waikato
    Posts
    2,395
    Remington used to make a load called managed recoil I think,used it many moons ago when I had a .270, worked well and was very similar to shooting a 243,

  5. #5
    Member Happy Jack's Avatar
    Join Date
    Jan 2020
    Location
    Nelson/Tasman
    Posts
    3,123
    I was under the impression but I'm no expert far from it that a low recoiling 308 is a 7mm08.

    Doesn't help though in this case.
    deer243, dannyb and Jukes like this.

  6. #6
    Member Waldo Peens's Avatar
    Join Date
    May 2017
    Location
    Christchurch
    Posts
    576
    Fiocchie Perfecta ammo and PPU ammo are generally slightly milder loads compared to others. This has been my experience when looking for common factory loafs for my Ruger Scout.
    dannyb likes this.
    The Truth shall make ye fret.

  7. #7
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,456
    Yeah Remington did make a managed/reduced recoil load, you may struggle to find any in NZ currently thou.

    It used a 125gr or 130gr bullet loaded with 30gr of IMR 4198 with velocity around 2200-2400, if you know a friendly handloader to knock some up for them, in my experience these reduced loads shoot mint with basically no development.
    Moa Hunter likes this.

  8. #8
    Member PaulNZ's Avatar
    Join Date
    Sep 2016
    Location
    Waikato
    Posts
    415
    I'm just heading out the door, but this came up with a quick search: https://55six.co.nz/product/hornady-...t-custom-lite/
    MB and bigbear like this.

  9. #9
    Caretaker
    Join Date
    Dec 2011
    Location
    Hawkes Bay
    Posts
    8,756
    Educate them on the many benefits of a suppressor, including the ongoing reduced stress to their valued livestock as that tool is being used around the farm

    Their tractors, motorbikes, cars and petrol powered tools have mufflers, they now have a new tool that needs a muffler for exactly the same reasons
    tetawa, tikka, GWH and 9 others like this.
    A big fast bullet beats a little fast bullet every time

  10. #10
    Member
    Join Date
    Mar 2013
    Location
    Marlborough
    Posts
    19
    The sako 123gr game head factory load worked well for me in smacking goats with my wee model seven in 308. Was not a reduced recoil load but definitely softer than a full house 150/165gr load. I shifted to a Belmont 150gr load instead for a bit more versatility.

    A suppressor really is the simple answer though, they then wouldn't be limited to a certain type of ammo that could be hard to find reliably.

  11. #11
    Member
    Join Date
    Oct 2013
    Location
    Waikato
    Posts
    414
    @Ground Control is your mate in Aussie? If so I guess that rules out a suppressor, unless he happens to be in NSW and can provide a highly compelling case to the local constabulary..

    As others have said, drop down to something around 130gr (the sako 123gr would be ideal) and fit a limbsaver. Another option would be to sell it and get a 243
    tetawa and deer243 like this.

  12. #12
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,365
    Ive seen reduced recoil loads on shop shelf only once...in Ashburton.... any projectile less than 150 grn will be softer shooting and believe it or not..the winchester power point 180 grn load is softer shooting than the 150grn version.....and its a seriously good killing round for closer range or bush work.
    the other smart option,is to find a reloading option...like belmont over here,and get a couple of hundred loads made up to something you want/more user friendly either go 130grn at mid range velocity or 150 at semi mild velocity,you dont have to drop much either projectile weight or powder charge for a large reduction in recoil...a limbsaver recoil pad makes huge difference and if suppressor not an option,double up ear protection....half the recoil battle is percieved recoil via noise....
    75/15/10 black powder matters

  13. #13
    Member Ground Control's Avatar
    Join Date
    Oct 2012
    Location
    Australia / Marlborough Sounds
    Posts
    1,262
    Quote Originally Posted by 7.62 View Post
    @Ground Control is your mate in Aussie? If so I guess that rules out a suppressor, unless he happens to be in NSW and can provide a highly compelling case to the local constabulary..

    As others have said, drop down to something around 130gr (the sako 123gr would be ideal) and fit a limbsaver. Another option would be to sell it and get a 243
    This is in QLD Australia , so suppressors are a no go .
    The young fella can shoot a .223 no worries at all , his father thought he was big/old enough to handle a 308 but in hindsight it might have been a bit to soon .
    I’ve sent them a few links to some lite 308 loads from Hornady etc that are available from Cleavers ( a big QLD gunshop) that they frequent when they are in Brisbane .
    Micky Duck likes this.
    FALL IN LOVE WITH THE NUMBERS , NOT THE IDEA

  14. #14
    Member andyanimal31's Avatar
    Join Date
    Dec 2011
    Location
    Makakahi road Raetihi
    Posts
    3,464
    Quote Originally Posted by 7mmsaum View Post
    Educate them on the many benefits of a suppressor, including the ongoing reduced stress to their valued livestock as that tool is being used around the farm

    Their tractors, motorbikes, cars and petrol powered tools have mufflers, they now have a new tool that needs a muffler for exactly the same reasons
    What he said.
    I just seen you are talking aussie, no cans over There!
    Sent from my SM-A226B using Tapatalk
    My favorite sentences i like to hear are - I suppose so. and Send It!

  15. #15
    Member
    Join Date
    Oct 2019
    Location
    Owaka
    Posts
    231
    Just thinking outside the box, they could fill the forend up with an epoxy resin to make the stock heavier which would soak up some of the kick? If they are carrying the rifle alot or shooting freehand that may be a dumb idea but if its a truck/quad gun could work. Pretty cheap and easy to replace the stock later when the lads a bit more battle hardened.

 

 

Similar Threads

  1. 260 factory ammo
    By superdiver in forum Reloading and Ballistics
    Replies: 12
    Last Post: 06-03-2020, 08:25 AM
  2. Re:Factory Ammo .308
    By Chris in forum Reloading and Ballistics
    Replies: 9
    Last Post: 30-07-2012, 07:02 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!